From e61f11fd527c1c45bd1f77ca94d50f1c8c564505 Mon Sep 17 00:00:00 2001 From: apQuinn303 <32212387+apQuinn303@users.noreply.github.com> Date: Mon, 2 Apr 2018 22:46:40 -0400 Subject: [PATCH] Added new pin headers & tri-state buffers -New 3-pin header to communicate with NAND Servo -Removed Obsolete 2pin header -Updated DB9 and UART -Added Tri-State Buffers to control TXD/RXD data flow. --- eCAD/Steering Board/Steering Controller.brd | 562 ++-- eCAD/Steering Board/Steering Controller.sch | 2967 ++++++++----------- 2 files changed, 1515 insertions(+), 2014 deletions(-) diff --git a/eCAD/Steering Board/Steering Controller.brd b/eCAD/Steering Board/Steering Controller.brd index 41a393b..8e4a3a6 100644 --- a/eCAD/Steering Board/Steering Controller.brd +++ b/eCAD/Steering Board/Steering Controller.brd @@ -1,6 +1,6 @@ - + @@ -9,19 +9,33 @@ - + + + + + + + + + + + + + + + - + - + - - - + + + @@ -33,19 +47,19 @@ - + - - + + - + - - + + - + @@ -64,60 +78,60 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -126,21 +140,21 @@ - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + @@ -148,19 +162,19 @@ -5V -ENC_B -ENC_A -GND ++12V +DATA +GND STEER_PWM GND -TXD -RXD -GND +TXD +RXD +GND Robobuggy Steering Controller By Sean Buckley ++5V @@ -362,27 +376,21 @@ You are welcome to use this library for commercial purposes. For attribution, we >NAME >VALUE - -<h3>Plated Through Hole - 4 Pin</h3> + +<h3>Plated Through Hole - 3 Pin</h3> <p>Specifications: -<ul><li>Pin count:4</li> +<ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): -<ul><li>CONN_04</li> +<ul><li>CONN_03</li> </ul></p> - - - - - - @@ -396,48 +404,16 @@ You are welcome to use this library for commercial purposes. For attribution, we - + - - >NAME >VALUE - -<h3>Plated Through Hole</h3> -<p>Specifications: -<ul><li>Pin count:2</li> -<li>Pin pitch:0.1"</li> -</ul></p> -<p>Example device(s): -<ul><li>CONN_02</li> -</ul></p> - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - @@ -461,25 +437,18 @@ Example device(s): CONN_06 - -Plated Through Hole - 4 Pin + +Plated Through Hole - 3 Pin Specifications: -Pin count:4 +Pin count:3 Pin pitch:0.1" Example device(s): -CONN_04 - - - -Plated Through Hole -Specifications: -Pin count:2 -Pin pitch:0.1" - -Example device(s): -CONN_02 +CONN_03 + + + @@ -730,6 +699,49 @@ LED + + + +<b>DCT (R-PDSO-G8)</b> PLSTIG SMALL-OUTLINE PACKAGE<p> +Source: http://focus.ti.com/lit/ds/symlink/sn74lvc2g53.pdf + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + @@ -815,6 +827,7 @@ Please make sure your boards conform to these design rules. + @@ -943,8 +956,8 @@ Please make sure your boards conform to these design rules. - - + + @@ -976,10 +989,25 @@ Please make sure your boards conform to these design rules. - - + + + + + + + + + + + + + + + + + + - @@ -999,68 +1027,46 @@ Please make sure your boards conform to these design rules. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + @@ -1079,7 +1085,6 @@ Please make sure your boards conform to these design rules. - @@ -1088,7 +1093,6 @@ Please make sure your boards conform to these design rules. - @@ -1118,27 +1122,39 @@ Please make sure your boards conform to these design rules. - - - - - - - - + + + + + + + + + + + + + + + + + + + + @@ -1146,21 +1162,39 @@ Please make sure your boards conform to these design rules. - - - + + + + + + + + + + + - - - + + + + + + + + + + + + + @@ -1243,45 +1277,75 @@ Please make sure your boards conform to these design rules. - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - + + + + + + + + + + + + - - - - - - - - - - - - + + + + + + + + + - - - - - - - - - - - - - + + + + + + + diff --git a/eCAD/Steering Board/Steering Controller.sch b/eCAD/Steering Board/Steering Controller.sch index 16a59e6..fe0634b 100644 --- a/eCAD/Steering Board/Steering Controller.sch +++ b/eCAD/Steering Board/Steering Controller.sch @@ -1,6 +1,6 @@ - + @@ -9,6 +9,20 @@ + + + + + + + + + + + + + + @@ -1411,27 +1425,21 @@ Alternate pin configuration >NAME >VALUE - -<h3>Plated Through Hole - 4 Pin</h3> + +<h3>Plated Through Hole - 3 Pin</h3> <p>Specifications: -<ul><li>Pin count:4</li> +<ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): -<ul><li>CONN_04</li> +<ul><li>CONN_03</li> </ul></p> - - - - - - @@ -1445,142 +1453,86 @@ Alternate pin configuration - + - - >NAME >VALUE - -<h3>Molex 4-Pin Plated Through-Hole</h3> + +<h3>PTH - 3 Pin Vertical Molex Polarized Header</h3> +<p><b>Datasheet referenced for footprint:</b><a href="http://www.4uconnector.com/online/object/4udrawing/01932.pdf"> 4UCONN part # 01932 </a></p> <p>Specifications: -<ul><li>Pin count:4</li> +<ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul></p> -<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): -<ul><li>CONN_04</li> +<ul><li>CONN_03</li> </ul></p> - - - - + + + + - - + + - ->NAME ->VALUE +>NAME +>VALUE - -<h3>Screw Terminal 3.5mm Pitch -4 Pin PTH</h3> + +<h3>Screw Terminal 3.5mm Pitch -3 Pin PTH</h3> <p>Specifications: -<ul><li>Pin count: 4</li> +<ul><li>Pin count: 3</li> <li>Pin pitch: 3.5mm/138mil</li> </ul></p> <p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): -<ul><li>CONN_04</li> +<ul><li>CONN_03</li> </ul></p> - - - - + + + + - + - - - - - - - - - - - ->NAME ->VALUE - - -<h3>Plated Through Hole - 4 Pin</h3> -<p>Specifications: -<ul><li>Pin count:4</li> -<li>Pin pitch: 1.27mm</li> -</ul></p> -<p>Example device(s): -<ul><li>CONN_04</li> -</ul></p> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE + + + + + + +>NAME +>VALUE - -<h3>Plated Through Hole - 4 Pin Locking Footprint</h3> -Pins are offset 0.005" from center to lock pins in place during soldering. + +<h3>Plated Through Hole - 3 Pin Locking Footprint</h3> +Pins are staggered 0.005" off center to lock pins while soldering. <p>Specifications: -<ul><li>Pin count:4</li> +<ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): -<ul><li>CONN_04</li> +<ul><li>CONN_03</li> </ul></p> - - - - - - @@ -1594,934 +1546,505 @@ Pins are offset 0.005" from center to lock pins in place during soldering. - + - - >NAME >VALUE - -<h3>Plated Through Hole - 4 Pin Long Pads w/ Locking Footprint</h3> -Holes are offset 0.005" from center to lock pins in place during soldering. + +<h3>Plated Through Hole - 3 Pin Long Pad w/ Locking Footprint</h3> +Holes are offset 0.005" from center to lock pins in place while soldering. <p>Specifications: -<ul><li>Pin count:4</li> +<ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): -<ul><li>CONN_04</li> +<ul><li>CONN_03</li> </ul></p> - - - - - - + + + + + - - ->NAME +>NAME >VALUE - -<h3>Molex 4-Pin Plated Through-Hole Locking</h3> -Holes are offset 0.005" from center to hold pins in place during soldering. + +<h3>PTH - 3 Pin Vertical Molex Polarized Header</h3> +Pins are offset 0.005" from center to lock pins in place during soldering. +<p><b>Datasheet referenced for footprint:</b><a href="http://www.4uconnector.com/online/object/4udrawing/01932.pdf"> 4UCONN part # 01932 </a></p> <p>Specifications: -<ul><li>Pin count:4</li> +<ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul></p> -<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): -<ul><li>CONN_04</li> +<ul><li>CONN_03</li> </ul></p> - - - - + + + + - - + + - ->NAME ->VALUE + + + +>NAME +>VALUE - -<h3>SMD - 4 Pin Right Angle Male Header</h3> -tDocu layer shows pin locations. + +<h3>Screw Terminal 3.5mm Pitch -3 Pin PTH Locking</h3> +Holes are offset 0.007" from center to hold pins in place during soldering. <p>Specifications: -<ul><li>Pin count:4</li> -<li>Pin pitch:0.1"</li> +<ul><li>Pin count: 3</li> +<li>Pin pitch: 3.5mm/138mil</li> </ul></p> +<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): -<ul><li>CONN_04</li> +<ul><li>CONN_03</li> </ul></p> - - - - - - - - - - - - - - - - - - ->NAME ->VALUE + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE - -<h3>Plated Through Hole - 4 Pin Long Pads</h3> + +<h3>Plated Through Hole - 3 Pin No Silk Outline</h3> <p>Specifications: -<ul><li>Pin count:4</li> +<ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): -<ul><li>CONN_04</li> +<ul><li>CONN_03</li> </ul></p> - - - - - - - + + + ->NAME ->VALUE +>NAME +>VALUE - -<h3>Plated Through Hole - 4 Pin No Silk Outline</h3> + +<h3>Plated Through Hole - 3 Pin Long Pads</h3> <p>Specifications: -<ul><li>Pin count:4</li> +<ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): -<ul><li>CONN_04</li> +<ul><li>CONN_03</li> </ul></p> - - - - - + + + + + ->NAME ->VALUE +>NAME +>VALUE - -<h3>JST Right Angle 4 Pin Plated Through Hole</h3> + +<h3>JST 3 Pin Right Angle Plated Through Hole</h3> <p>Specifications: -<ul><li>Pin count: 4</li> -<li>Pin pitch: 2mm</li> +<ul><li>Pin count:3</li> +<li>Pin pitch:2mm</li> </ul></p> <p><a href=”https://www.sparkfun.com/datasheets/Prototyping/ePH.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): -<ul><li>CONN_04</li> +<ul><li>CONN_03</li> </ul></p> - - - - -+ -- -S -S + + + + + + + + + + ++ +- +S >NAME >VALUE - - - - - - - - -<h3>Screw Terminal 3.5mm Pitch -4 Pin PTH Locking</h3> -Holes are offset 0.005" from center to hold pins in place during soldering. + +<h3>Pogo Pins - 3 Pin</h3> <p>Specifications: -<ul><li>Pin count: 4</li> -<li>Pin pitch: 3.5mm/138mil</li> +<ul><li>Pin count:3</li> </ul></p> -<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): -<ul><li>CONN_04</li> +<ul><li>CONN_03</li> </ul></p> - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE + + + + + + + + + +>NAME +>VALUE - -<h3>SMD- 4 Pin Right Angle </h3> + +<h3>Screw Terminal 5mm Pitch -3 Pin PTH</h3> <p>Specifications: -<ul><li>Pin count:4</li> -<li>Pin pitch:0.1"</li> +<ul><li>Pin count: 3</li> +<li>Pin pitch: 5mm/197mil</li> </ul></p> +<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-5mm.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): -<ul><li>CONN_04</li> +<ul><li>CONN_03</li> </ul></p> - - - - - - - - - - - - ->NAME ->VALUE + + + + + + + + + + + + + + + + + +>NAME +>VALUE - -<h3>SMD - 4 Pin Vertical Connector</h3> + +<h3>Plated Through Hole - 3 Pin Locking Footprint w/out Silk Outline</h3> +Holes are offset from center 0.005" to lock pins in place while soldering. <p>Specifications: -<ul><li>Pin count:4</li> -<li>SMD Pad count:8</li> +<ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): -<ul><li>CONN_04</li> +<ul><li>CONN_03</li> </ul></p> - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE + + + + + + +>NAME +>VALUE - -<h3>SMD - 4 Pin w/ Long Solder Pads</h3> -No silk, but tDocu layer shows pin position. + +<h3>JST 3 Pin Right Angle SMT</h3> <p>Specifications: -<ul><li>Pin count:4</li> -<li>Pin pitch:0.1"</li> +<ul><li>Pin count:3</li> +<li>Pin pitch:2mm</li> </ul></p> <p>Example device(s): -<ul><li>CONN_04</li> +<ul><li>CONN_03</li> </ul></p> - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + +>NAME +>VALUE - -<h3>JST Vertical 4 Pin Plated Through Hole</h3> + +<h3>Plated Through Hole - 3 Pin SMD</h3> <p>Specifications: -<ul><li>Pin count: 4</li> -<li>Pin pitch: 2mm</li> +<ul><li>Pin count:3</li> </ul></p> -<p><a href="http://www.jst-mfg.com/product/pdf/eng/ePH.pdf">Datasheet referenced for footprint</a></p> <p>Example device(s): -<ul><li>CONN_04</li> +<ul><li>CONN_03</li> </ul></p> - - - - - - - - - - - - -+ -- -Y -B ->NAME ->VALUE + + + + + + + + + + + +>NAME +>VALUE - -<h3>SMD - 4 Pin Right-Angle Female Header</h3> -Silk outline shows header location. + +<h3>SMD - 3 Pin Right Angle Female Header</h3> +Silk outline of pin location <p>Specifications: -<ul><li>Pin count:4</li> +<ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): -<ul><li>CONN_04</li> +<ul><li>CONN_03</li> </ul></p> - - - - - - - - - - - - ->NAME ->VALUE + + + + + + + + + + +>NAME +>VALUE - -<h3>Plated Through Hole</h3> + +<h3>SMD- 3 Pin Right Angle Male Headers</h3> +No silk outline, but tDocu layer shows pin location. <p>Specifications: -<ul><li>Pin count:2</li> +<ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul></p> <p>Example device(s): -<ul><li>CONN_02</li> +<ul><li>CONN_03</li> </ul></p> - - - - - - - - - - - - - - - - - - ->NAME ->VALUE + + + + + + + + + + + + + + + + +>NAME +>VALUE - -<h3>Molex 2-Pin Plated Through-Hole</h3> + +<h3>SMD - 3 Pin Right Angle Male Header w/ Alignment Posts</h3> +<p><b>Datasheet referenced for footprint:</b><a href="http://www.4uconnector.com/online/object/4udrawing/11026.pdf"> 4UCONN part # 11026 </a></p> <p>Specifications: -<ul><li>Pin count:2</li> +<ul><li>Pin count:3</li> <li>Pin pitch:0.1"</li> </ul></p> -<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): -<ul><li>CONN_02</li> +<ul><li>CONN_03</li> </ul></p> - - - - - - - - - - - ->NAME ->VALUE + + + + + + + + + + + + + + + + + + +>NAME +>VALUE - -<h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH</h3> + +<h3>JST 3 Pin Vertical Plated Through Hole</h3> <p>Specifications: -<ul><li>Pin count: 2</li> -<li>Pin pitch: 3.5mm/138mil</li> +<ul><li>Pin count:3</li> +<li>Pin pitch:2mm</li> </ul></p> -<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p> +<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/ePH.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): -<ul><li>CONN_02</li> +<ul><li>CONN_03</li> </ul></p> - - - - - - - - - - - - - - - - ->NAME ->VALUE + + + + + + + + + + + ++ +- +S +>NAME +>VALUE - -<h3>JST-Right Angle Male Header SMT</h3> + +<h3>SMD - 3 Pin Right Angle Male Header w/ Alignment Posts</h3> +<p><b>Datasheet referenced for footprint:</b><a href="http://www.4uconnector.com/online/object/4udrawing/11026.pdf"> 4UCONN part # 11026 </a></p> <p>Specifications: -<ul><li>Pin count: 2</li> -<li>Pin pitch: 2mm</li> +<ul><li>Pin count:3</li> +<li>Pin pitch:0.1"</li> </ul></p> -<p><a href=”http://www.4uconnector.com/online/object/4udrawing/20404.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): -<ul><li>CONN_02</li> -<li>JST_2MM_MALE</li> +<ul><li>CONN_03</li> </ul></p> - - - - - - - - - - - - - ->NAME ->VALUE + + + + + + + + + + + + + + + + + + - -<h3>Plated Through Hole</h3> -<p>Specifications: -<ul><li>Pin count:2</li> -<li>Pin pitch:0.15"</li> -</ul></p> -<p>Example device(s): -<ul><li>CONN_02</li> -</ul></p> - - - - - - ->NAME ->VALUE + + + + + + + + + + + + + + + + + + + - -<h3>JST-Vertical Male Header SMT </h3> + +<h3>JST 3 Pin Right Angle Plated Through Hole &ndash; NO SILK</h3> +<p>No silkscreen outline. tDoc layer (51) indicates connector footprint.</p> <p>Specifications: -<ul><li>Pin count: 2</li> -<li>Pin pitch: 2mm</li> +<ul><li>Pin count:3</li> +<li>Pin pitch:2mm</li> </ul></p> -<p><a href=”http://www.4uconnector.com/online/object/4udrawing/20404.pdf”>Datasheet referenced for footprint</a></p> +<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/ePH.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): -<ul><li>CONN_02</li> +<ul><li>CONN_03</li> </ul></p> - - - - - - - - - - - - - - - ->Name ->Value + + + + + + + + + + ++ +- +S +>NAME +>VALUE - -<h3>Screw Terminal 5mm Pitch -2 Pin PTH</h3> + +<h3>Screw Terminal 3.5mm Pitch -3 Pin PTH &ndash; NO SILK</h3> +<p>No silkscreen outline. tDoc layer (51) indicates connector footprint.</p> <p>Specifications: -<ul><li>Pin count: 2</li> -<li>Pin pitch: 5mm/197mil</li> +<ul><li>Pin count: 3</li> +<li>Pin pitch: 3.5mm/138mil</li> </ul></p> -<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-5mm.pdf”>Datasheet referenced for footprint</a></p> +<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p> <p>Example device(s): -<ul><li>CONN_02</li> +<ul><li>CONN_03</li> </ul></p> - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<h3>Plated Through Hole - Locking Footprint</h3> -Holes are staggered by 0.005" from center to hold pins while soldering. -<p>Specifications: -<ul><li>Pin count:2</li> -<li>Pin pitch:0.1"</li> -</ul></p> -<p>Example device(s): -<ul><li>CONN_02</li> -</ul></p> - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<h3>Molex 2-Pin Plated Through-Hole Locking Footprint</h3> -Holes are offset from center by 0.005" to hold pins in place during soldering. -<p>Specifications: -<ul><li>Pin count:2</li> -<li>Pin pitch:0.1"</li> -</ul></p> -<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p> -<p>Example device(s): -<ul><li>CONN_02</li> -</ul></p> - - - - - - - - - - - - - ->NAME ->VALUE - - -<h3>Plated Through Hole - Long Pads with Locking Footprint</h3> -Pins are staggered by 0.005" from center to hold pins in place while soldering. -<p>Specifications: -<ul><li>Pin count:2</li> -<li>Pin pitch:0.1"</li> -</ul></p> -<p>Example device(s): -<ul><li>CONN_02</li> -</ul></p> - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH Locking</h3> -Holes are offset from center 0.005" to hold pins in place during soldering. -<p>Specifications: -<ul><li>Pin count: 2</li> -<li>Pin pitch: 3.5mm/138mil</li> -</ul></p> -<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p> -<p>Example device(s): -<ul><li>CONN_02</li> -</ul></p> - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<h3>Plated Through Hole - Long Pads without Silk Outline</h3> -<p>Specifications: -<ul><li>Pin count:2</li> -<li>Pin pitch:0.1"</li> -</ul></p> -<p>Example device(s): -<ul><li>CONN_02</li> -</ul></p> - - ->NAME ->VALUE - - -<h3>Plated Through Hole - No Silk Outline</h3> -<p>Specifications: -<ul><li>Pin count:2</li> -<li>Pin pitch:0.1"</li> -</ul></p> -<p>Example device(s): -<ul><li>CONN_02</li> -</ul></p> - - - - ->NAME ->VALUE - - -<h3>JST 2 Pin Right Angle Plated Through Hole</h3> -tDocu indicate polarity for connections that match SparkFun LiPo battery terminations. -<p>Specifications: -<ul><li>Pin count: 2</li> -<li>Pin pitch:2mm</li> -</ul></p> -<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a></p> -<p>Example device(s): -<ul><li>CONN_02</li> -</ul></p> - - ->Name ->Value -+ -- - - - - - - - - - -<h3>Plated Through Hole - 0.1" holes</h3> -<p>Specifications: -<ul><li>Pin count:2</li> -<li>Pin pitch:0.2"</li> -</ul></p> -<p>Example device(s): -<ul><li>CONN_02</li> -</ul></p> - - - - - - ->NAME ->VALUE - - -<h3>Pogo Pins Connector - No Silk Outline</h3> -<p>Specifications: -<ul><li>Pin count:2</li> -<li>Pin pitch:0.1"</li> -</ul></p> -<p>Example device(s): -<ul><li>CONN_02</li> -</ul></p> - - - - - - ->NAME ->VALUE - - -<h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH No Silk Outline</h3> -<p>Specifications: -<ul><li>Pin count: 2</li> -<li>Pin pitch: 3.5mm/138mil</li> -</ul></p> -<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p> -<p>Example device(s): -<ul><li>CONN_02</li> -</ul></p> - - - - - - - - - - - - - - - - ->NAME ->VALUE - - -<h3>JST 2 Pin Right Angle Plated Through Hole- No Silk</h3> -tDocu indicate polarity for connections that match SparkFun LiPo battery terminations. -<br> No silk outline of connector. -<p>Specifications: -<ul><li>Pin count: 2</li> -<li>Pin pitch:2mm</li> -</ul></p> -<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a></p> -<p>Example device(s): -<ul><li>CONN_02</li> -</ul></p> - - - - - - - - - ->Name ->Value -+ -- - - -<h3>JST 2 Pin Right Angle Plated Through Hole - KIT</h3> -tDocu indicate polarity for connections that match SparkFun LiPo battery terminations. -<br> This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. -<br> This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side. -<p>Specifications: -<ul><li>Pin count: 2</li> -<li>Pin pitch:2mm</li> -</ul></p> -<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a></p> -<p>Example device(s): -<ul><li>CONN_02</li> -</ul></p> - - - - - - - - - ->Name ->Value -+ -- - - - - - - - - - - - - - - - - - - - - - - - - - - -<h3>Spring Terminal- PCB Mount 2 Pin PTH</h3> -tDocu marks the spring arms -<p>Specifications: -<ul><li>Pin count: 4</li> -<li>Pin pitch: 0.1"</li> -</ul></p> -<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/SpringTerminal.pdf”>Datasheet referenced for footprint</a></p> -<p>Example device(s): -<ul><li>CONN_02</li> -</ul></p> - - - - - - - - - - - - - - - - - - - -<h3>2 Pin Screw Terminal - 2.54mm</h3> -<p>Specifications: -<ul><li>Pin count:2</li> -<li>Pin pitch:0.1"</li> -</ul></p> -<p>Example device(s): -<ul><li>CONN_02</li> -</ul></p> - - - - - - - - - ->NAME ->VALUE - - -2 pin poke-home connector - -part number 2062-2P from STA - - - - - - - - - ->NAME ->VALUE - - - - - - ->NAME ->VALUE - - + + + + + + + + + + + + + + + + +>NAME +>VALUE @@ -2772,430 +2295,314 @@ Example device(s): CONN_06 - -Plated Through Hole - 4 Pin + +Plated Through Hole - 3 Pin Specifications: -Pin count:4 +Pin count:3 Pin pitch:0.1" Example device(s): -CONN_04 +CONN_03 + + + - -Molex 4-Pin Plated Through-Hole + +PTH - 3 Pin Vertical Molex Polarized Header +Datasheet referenced for footprint: 4UCONN part # 01932 Specifications: -Pin count:4 +Pin count:3 Pin pitch:0.1" -Datasheet referenced for footprint Example device(s): -CONN_04 +CONN_03 + + + - -Screw Terminal 3.5mm Pitch -4 Pin PTH + +Screw Terminal 3.5mm Pitch -3 Pin PTH Specifications: -Pin count: 4 +Pin count: 3 Pin pitch: 3.5mm/138mil Datasheet referenced for footprint Example device(s): -CONN_04 - - - -Plated Through Hole - 4 Pin -Specifications: -Pin count:4 -Pin pitch: 1.27mm - -Example device(s): -CONN_04 - - - -Plated Through Hole - 4 Pin Locking Footprint -Pins are offset 0.005" from center to lock pins in place during soldering. -Specifications: -Pin count:4 -Pin pitch:0.1" - -Example device(s): -CONN_04 - - - -Plated Through Hole - 4 Pin Long Pads w/ Locking Footprint -Holes are offset 0.005" from center to lock pins in place during soldering. -Specifications: -Pin count:4 -Pin pitch:0.1" - -Example device(s): -CONN_04 - - - -Molex 4-Pin Plated Through-Hole Locking -Holes are offset 0.005" from center to hold pins in place during soldering. -Specifications: -Pin count:4 -Pin pitch:0.1" - -Datasheet referenced for footprint -Example device(s): -CONN_04 +CONN_03 + + + - -SMD - 4 Pin Right Angle Male Header -tDocu layer shows pin locations. + +Plated Through Hole - 3 Pin Locking Footprint +Pins are staggered 0.005" off center to lock pins while soldering. Specifications: -Pin count:4 +Pin count:3 Pin pitch:0.1" Example device(s): -CONN_04 +CONN_03 + + + - -Plated Through Hole - 4 Pin Long Pads + +Plated Through Hole - 3 Pin Long Pad w/ Locking Footprint +Holes are offset 0.005" from center to lock pins in place while soldering. Specifications: -Pin count:4 +Pin count:3 Pin pitch:0.1" Example device(s): -CONN_04 +CONN_03 + + + - -Plated Through Hole - 4 Pin No Silk Outline + +PTH - 3 Pin Vertical Molex Polarized Header +Pins are offset 0.005" from center to lock pins in place during soldering. +Datasheet referenced for footprint: 4UCONN part # 01932 Specifications: -Pin count:4 +Pin count:3 Pin pitch:0.1" Example device(s): -CONN_04 - - - -JST Right Angle 4 Pin Plated Through Hole -Specifications: -Pin count: 4 -Pin pitch: 2mm - -Datasheet referenced for footprint -Example device(s): -CONN_04 +CONN_03 + + + - -Screw Terminal 3.5mm Pitch -4 Pin PTH Locking -Holes are offset 0.005" from center to hold pins in place during soldering. + +Screw Terminal 3.5mm Pitch -3 Pin PTH Locking +Holes are offset 0.007" from center to hold pins in place during soldering. Specifications: -Pin count: 4 +Pin count: 3 Pin pitch: 3.5mm/138mil Datasheet referenced for footprint Example device(s): -CONN_04 - - - -SMD- 4 Pin Right Angle -Specifications: -Pin count:4 -Pin pitch:0.1" - -Example device(s): -CONN_04 - - - -SMD - 4 Pin Vertical Connector -Specifications: -Pin count:4 -SMD Pad count:8 -Pin pitch:0.1" - -Example device(s): -CONN_04 - - - -SMD - 4 Pin w/ Long Solder Pads -No silk, but tDocu layer shows pin position. -Specifications: -Pin count:4 -Pin pitch:0.1" - -Example device(s): -CONN_04 - - - -JST Vertical 4 Pin Plated Through Hole -Specifications: -Pin count: 4 -Pin pitch: 2mm - -Datasheet referenced for footprint -Example device(s): -CONN_04 - - - -SMD - 4 Pin Right-Angle Female Header -Silk outline shows header location. -Specifications: -Pin count:4 -Pin pitch:0.1" - -Example device(s): -CONN_04 +CONN_03 + + + - -Plated Through Hole + +Plated Through Hole - 3 Pin No Silk Outline Specifications: -Pin count:2 +Pin count:3 Pin pitch:0.1" Example device(s): -CONN_02 +CONN_03 + + + - -Molex 2-Pin Plated Through-Hole + +Plated Through Hole - 3 Pin Long Pads Specifications: -Pin count:2 +Pin count:3 Pin pitch:0.1" -Datasheet referenced for footprint -Example device(s): -CONN_02 - - - -Screw Terminal 3.5mm Pitch - 2 Pin PTH -Specifications: -Pin count: 2 -Pin pitch: 3.5mm/138mil - -Datasheet referenced for footprint Example device(s): -CONN_02 +CONN_03 + + + - -JST-Right Angle Male Header SMT + +JST 3 Pin Right Angle Plated Through Hole Specifications: -Pin count: 2 -Pin pitch: 2mm +Pin count:3 +Pin pitch:2mm Datasheet referenced for footprint Example device(s): -CONN_02 -JST_2MM_MALE - - - -Plated Through Hole -Specifications: -Pin count:2 -Pin pitch:0.15" - -Example device(s): -CONN_02 +CONN_03 + + + - -JST-Vertical Male Header SMT + +Pogo Pins - 3 Pin Specifications: -Pin count: 2 -Pin pitch: 2mm +Pin count:3 -Datasheet referenced for footprint Example device(s): -CONN_02 +CONN_03 + + + - -Screw Terminal 5mm Pitch -2 Pin PTH + +Screw Terminal 5mm Pitch -3 Pin PTH Specifications: -Pin count: 2 +Pin count: 3 Pin pitch: 5mm/197mil Datasheet referenced for footprint Example device(s): -CONN_02 +CONN_03 + + + - -Plated Through Hole - Locking Footprint -Holes are staggered by 0.005" from center to hold pins while soldering. + +Plated Through Hole - 3 Pin Locking Footprint w/out Silk Outline +Holes are offset from center 0.005" to lock pins in place while soldering. Specifications: -Pin count:2 +Pin count:3 Pin pitch:0.1" Example device(s): -CONN_02 +CONN_03 + + + - -Molex 2-Pin Plated Through-Hole Locking Footprint -Holes are offset from center by 0.005" to hold pins in place during soldering. + +JST 3 Pin Right Angle SMT Specifications: -Pin count:2 -Pin pitch:0.1" +Pin count:3 +Pin pitch:2mm -Datasheet referenced for footprint Example device(s): -CONN_02 +CONN_03 + + + - -Plated Through Hole - Long Pads with Locking Footprint -Pins are staggered by 0.005" from center to hold pins in place while soldering. + +Plated Through Hole - 3 Pin SMD Specifications: -Pin count:2 -Pin pitch:0.1" +Pin count:3 Example device(s): -CONN_02 +CONN_03 + + + - -Screw Terminal 3.5mm Pitch - 2 Pin PTH Locking -Holes are offset from center 0.005" to hold pins in place during soldering. + +SMD - 3 Pin Right Angle Female Header +Silk outline of pin location Specifications: -Pin count: 2 -Pin pitch: 3.5mm/138mil +Pin count:3 +Pin pitch:0.1" -Datasheet referenced for footprint Example device(s): -CONN_02 +CONN_03 + + + - -Plated Through Hole - Long Pads without Silk Outline + +SMD- 3 Pin Right Angle Male Headers +No silk outline, but tDocu layer shows pin location. Specifications: -Pin count:2 +Pin count:3 Pin pitch:0.1" Example device(s): -CONN_02 +CONN_03 + + + - -Plated Through Hole - No Silk Outline + +SMD - 3 Pin Right Angle Male Header w/ Alignment Posts +Datasheet referenced for footprint: 4UCONN part # 11026 Specifications: -Pin count:2 +Pin count:3 Pin pitch:0.1" Example device(s): -CONN_02 +CONN_03 + + + - -JST 2 Pin Right Angle Plated Through Hole -tDocu indicate polarity for connections that match SparkFun LiPo battery terminations. + +JST 3 Pin Vertical Plated Through Hole Specifications: -Pin count: 2 +Pin count:3 Pin pitch:2mm Datasheet referenced for footprint Example device(s): -CONN_02 - - - -Plated Through Hole - 0.1" holes -Specifications: -Pin count:2 -Pin pitch:0.2" - -Example device(s): -CONN_02 +CONN_03 + + + - -Pogo Pins Connector - No Silk Outline + +SMD - 3 Pin Right Angle Male Header w/ Alignment Posts +Datasheet referenced for footprint: 4UCONN part # 11026 Specifications: -Pin count:2 +Pin count:3 Pin pitch:0.1" Example device(s): -CONN_02 +CONN_03 + + + - -Screw Terminal 3.5mm Pitch - 2 Pin PTH No Silk Outline -Specifications: -Pin count: 2 -Pin pitch: 3.5mm/138mil - -Datasheet referenced for footprint -Example device(s): -CONN_02 - + + + + - -JST 2 Pin Right Angle Plated Through Hole- No Silk -tDocu indicate polarity for connections that match SparkFun LiPo battery terminations. - No silk outline of connector. + +JST 3 Pin Right Angle Plated Through Hole &ndash; NO SILK +No silkscreen outline. tDoc layer (51) indicates connector footprint. Specifications: -Pin count: 2 +Pin count:3 Pin pitch:2mm Datasheet referenced for footprint Example device(s): -CONN_02 +CONN_03 + + + - -JST 2 Pin Right Angle Plated Through Hole - KIT -tDocu indicate polarity for connections that match SparkFun LiPo battery terminations. - This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. - This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side. + +Screw Terminal 3.5mm Pitch -3 Pin PTH &ndash; NO SILK +No silkscreen outline. tDoc layer (51) indicates connector footprint. Specifications: -Pin count: 2 -Pin pitch:2mm +Pin count: 3 +Pin pitch: 3.5mm/138mil Datasheet referenced for footprint Example device(s): -CONN_02 +CONN_03 - - -Spring Terminal- PCB Mount 2 Pin PTH -tDocu marks the spring arms -Specifications: -Pin count: 4 -Pin pitch: 0.1" - -Datasheet referenced for footprint -Example device(s): -CONN_02 - - - -2 Pin Screw Terminal - 2.54mm -Specifications: -Pin count:2 -Pin pitch:0.1" - -Example device(s): -CONN_02 - - - -2 pin poke-home connector - -part number 2062-2P from STA - - + + + @@ -3254,35 +2661,20 @@ Standard DB9 (D-Sub 9) serial connector. Can be used for CAN bus as well as RS48 - -<h3>4 Pin Connection</h3> - - - - - - - - ->VALUE ->NAME - - - - - - -<h3>2 Pin Connection</h3> - + +<h3>3 Pin Connection</h3> + - - + + + ->VALUE +>VALUE >NAME - - + + + @@ -3489,573 +2881,260 @@ Standard DB9 (D-Sub 9) serial connector. Can be used for CAN bus as well as RS48 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -<h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3> - -<p></p> -<b>On any of the 0.1 inch spaced packages, you can populate with these:</b> -<ul> -<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li> -<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li> -<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li> -<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li> -<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li> -</ul> - -<p></p> -<b> For SCREWTERMINALS and SPRING TERMINALS visit here:</b> -<ul> -<li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li> -</ul> - -<p></p> -<b>This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.</b> -<ul> -<li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li> -<li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li> -<li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li> -<p></p> -</ul> - -<p></p> -<b>Special notes:</b> -<p> </p> Molex polarized connector foot print use with SKU : PRT-08231 with associated crimp pins and housings. 1MM SMD Version SKU: PRT-10208 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + - + - - - - + - + + + - + - + + + - + - - - + - + + + - + - - - + - + + + - + - - - - + - + + + - + - - + - + + + - + - + - + + + - + - + - + + + - + - - + - + + + - + - + + + - + + + - + - - + - + + + - + - - + + - + + + - + - - + - + + + - + - - - + - + + + - + - - - + - + <h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3> <p></p> @@ -4066,6 +3145,7 @@ Standard DB9 (D-Sub 9) serial connector. Can be used for CAN bus as well as RS48 <li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li> <li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li> <li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li> +<li><a href="https://www.sparkfun.com/products/13875"> Stackable Header - 3 Pin (Female, 0.1")</a> (PRT-13875)</li> </ul> <p></p> @@ -4085,313 +3165,339 @@ Standard DB9 (D-Sub 9) serial connector. Can be used for CAN bus as well as RS48 <p></p> <b>Special notes:</b> - - Molex polarized connector foot print use with: PRT-08233 with associated crimp pins and housings.<br><br> - -2.54_SCREWTERM for use with PRT-10571.<br><br> - -3.5mm Screw Terminal footprints for PRT-08084<br><br> - -5mm Screw Terminal footprints for use with PRT-08432 +<p> </p> +<p> </p> Molex polarized connector foot print use with SKU : PRT-08232 with associated crimp pins and housings. - + - + - - + + + - + - + - - + + + - + - + + - + - - + + + - + - + + - + - - + + + - + - - - + - + - - + + + - + - + - - + + + - + - + + + + - + - - + + + - + - + + - + - - + + + - + - + - - + + + - + - - - + - + - - + + + - + - + + + + - + - - + + + - + - - - + - + - - + + + - + - + + + + - + - - + + + - + - + - - + + + - + - - + + - + - - + + + - + - + - - + + + - + - + + + + - + - - + + + - + - + - + - - + + + - + - + - - + + + - + - + + + - + - - + + + - + - + + + - + - - + + + - + - + - - + + + - + - - - + - + - - + + + - + - - - + @@ -5958,6 +5064,186 @@ LED + + + +<b>DCT (R-PDSO-G8)</b> PLSTIG SMALL-OUTLINE PACKAGE<p> +Source: http://focus.ti.com/lit/ds/symlink/sn74lvc2g53.pdf + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<b>Supply Symbols</b><p> + GND, VCC, 0V, +5V, -5V, etc.<p> + Please keep in mind, that these devices are necessary for the + automatic wiring of the supply signals.<p> + The pin name defined in the symbol is identical to the net which is to be wired automatically.<p> + In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p> + <author>Created by librarian@cadsoft.de</author> + + + + + + +>VALUE + + + + + +<b>SUPPLY SYMBOL</b> + + + + + + + + + + + + + + +<b>Supply Symbols</b><p> +GND, VCC, 0V, +5V, -5V, etc.<p> +Please keep in mind, that these devices are necessary for the +automatic wiring of the supply signals.<p> +The pin name defined in the symbol is identical to the net which is to be wired automatically.<p> +In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p> +<author>Created by librarian@cadsoft.de</author> + + + + + + + +>VALUE + + + + + +<b>SUPPLY SYMBOL</b> + + + + + + + + + + + + + @@ -6002,8 +5288,19 @@ LED - - + + + + + + + + + + + + + @@ -6044,8 +5341,19 @@ LED - - + + + + + + + + + + + + + @@ -6125,14 +5433,60 @@ LED - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - @@ -6174,11 +5528,6 @@ LED + + + + + + + + + + + + + + + + + + + + @@ -6245,6 +5614,11 @@ LED - + - - - - - - - + - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - + - - - + + - - -