Synchronization Cables

Here you can find information about the parts needed to assemble the synchronization cables for the Intel RealSense sensors, and instructions on how to assemble them.

Parts List

• 3-core shielded cable - 30m (meters). Recommendation
• 4 x JST SH Connectors
• 12 x JST SH Crimp pins (You should get a lot more (like 100), because they are really small and break easily if you are not really careful when assembling the connectors - plus they are really cheap -)
• 4 x 20K Resistors and 22nF Capacitors (Again, you should get a lot more; it is easy to make mistakes)
• 1 x PA-09 Crimping Tool

Instructions

Firstly the pins that need to be connected are pins 1, 5, and 9.

Pin #1 is the ground pin.

Pin #5 is the synchronization signal pin

Pin #9 is the General Purpose Input/Output (GPIO) pin

• The schematic for the RC-filters is described in Intel's white paper.

Pictures (or a video) with instruction on how to assemble a connector will be available soon.