Capturer Setup

Architecture

For the needs of the capturing system, 4 Intel NUC ,4 Intel Realsense D-400 Series and a high-end desktop workstation are required, as well as 4 tripods and mounting stations for the devices and a LAN switch.

NUC Setup

Our application was built and tested under Windows 10 operating system. In order to use the application, some Windows settings have to be set to each Intel NUC (listed below).

Steps to setup Intel NUC :

• Disable Windows Updates. (how to)
• Configure Local Time Zone to all devices.
• Enable Remote Desktop. (how to)
• Enable High Performance Settings. (how to)
• Disable USB power management. (how to)
• Install remote-eye. (how to)
• Install remote-eye Windows Service. (how to)

Workstation Setup

• In order to easily represent a device by a user friendly unique name instead of serial number, adding and naming every device to the repository is highly recommended. A detailed manual is present here.

Running the application

Once all of the above steps are completed, you can launch the application which is under volumetric_capture_beta_win64 folder at Releases by double clicking volumetric_capture.exe .