Build prototype

[SerjSanchez]

• Solder SGTL5000 @David-Estevez
• Solder all the available components
• Test working on finished prototypes
• FInish the half done prototype
• Buy Teensys and voltage regulator caps
• Buy some LCDs
• Solder the missing components on all of the prototypes
• Test working on all the prototypes.

[David-Estevez]

I have just received the required components that I ordered from Mouser. Let's schedule one day to go to the electronics lab in our uni and solder the SGTL5000 (unless @SerjSanchez is not interested in being present while I solder that).

[SerjSanchez]

I need seeing @David-Estevez soldering that. Just to remember him he chose to do it and said it was "easy" evil laugh

At least one, for the 'commedy' and to keep some visual documentation, should be enough, though.

[L4g0]

Isn't this already done? Should we change this to the "Done" column in the projects tab?

[SerjSanchez]

Actually, it's almost done. There are a few caps I forgot to include in the schematic that need to be "ñaped". Also, there is a prototype that has only half of the components cause we were not expecting to be able to build all of them the same day and we bought less from some of the components.

Also, there's only a prototype with a Teensy...

Anyway, would be nice to update this, so thanks for the reminder! ;)