AI Human Detection and Meshtastic Notification | Seeed Studio Wiki

[giscus[bot]]

AI Human Detection and Meshtastic Notification | Seeed Studio Wiki

This wiki demonstrates an AI-driven human detection system using an AI camera and XIAO ESP32S3 & Wio SX1262 Meshtastic networking to broadcast real-time alerts.

https://wiki.seeedstudio.com/ai_human_detection_meshtastic_broadcast/

[delllogi]

Hi! I’m a Meshtastic enthusiast and I own several nodes, including the Xiao ESP32S3 + Wio SX1262 kit, the nRF52840 + Wio SX1262 kit, and the Wio Tracker Pro. I’m also considering purchasing a T100-E next.
I followed all the steps described here and successfully set up a motion sensor thanks to the very clear instructions (thank you for that!). Would it be possible to achieve the same setup using the nRF52840 kit as well? If so, how would the firmware need to be modified and compiled? Or is there a precompiled version available for download somewhere?
Thanks again!

[xr686]

Hello, we have not tested the nRF52840 kit yet, but I think it should be universal. You can first test it according to our Wiki tutorial on the nRF52840 kit. If there are any problems, please let us know.

[delllogi]

Hello! in the last 2 days I've been trying to configure the kit with nRF, but I haven't succeeded. I've tried different pins, different settings in Meshstastic, but I only receive false messages sent every 15/30 seconds (depends on the minimum broadcast interval). As I mentioned in the previous post, on the esp32 s3 version, everything works correctly, but obviously the energy consumption is much higher. Basically, when I bought the nRF kit I was thinking of using it specifically for this scenario, but under the given conditions I don't know what else I could try...

[xr686]

Oh, sorry, after communicating with the R&D colleagues, the reason is that these are two different firmware sets and cannot be universal. If you want to use Meshtastic, we still recommend following the Xiao ESP32S3 in the Wiki.