AFRC_plasticity_800C_1s-1.txt

#!/bin/bash --login

# SGE options (whose lines must begin with #$)

#$ -cwd               # Run the job in the current directory 
source activate Abaqus_PYMC2
module load apps/binapps/abaqus/2022
#source $ABAQUS_HOME/liccheck.sh

#!/bin/sh
OUTPUTFILE="Quadratic_Plasticity_surrgt_test_800C_1s-1"
MAINSCRIPT="Quadratic_Plasticity_800C_1s-1.py"
IMPORTTEMPFILE="Abaqus_5_min_heatup/"
IMPORTTEMPDB="800150C_heatup22.odb"
MODEL="800C_1s-1_setup.inp"
PLASTICITYDATA="Patryk_mat_data.txt"
ODBREADER="read_Force_PEEQ_NT11_barrelling_forcemac.py"
SUBFOLDER="Abaqus/Friction_conductance/"
Temp_C="800"
SR="1"
βtransus="995"
initial_stress_min="0"
initial_stress_max="100"
Q_min="-2e6"
Q_max="3e6"
m_α_min="-0.1"
m_α_max="0.5"
m_β_min="0"
m_β_max="0.45"
n_α_min="2"
n_α_max="7"
n_β_min="2"
n_β_max="7"
Q_β_min="1e5"
Q_β_max="4e5"
Q_α_min="5e4"
Q_α_max="3e5"
B_min="5"
B_max="35"
a_min="1"
a_max="6"
b_min="0.1"
b_max="2"
runs="1000"
friction="0.7"
conductance="1500"
power"="0"
mkdir "/mnt/iusers01/jf01/w10944rb/scratch/${OUTPUTFILE}"
cp "/mnt/iusers01/jf01/w10944rb/${IMPORTTEMPFILE}${IMPORTTEMPDB}" "/mnt/iusers01/jf01/w10944rb/scratch/${OUTPUTFILE}"
cp "/mnt/iusers01/jf01/w10944rb/${SUBFOLDER}${ODBREADER}" "/mnt/iusers01/jf01/w10944rb/scratch/${OUTPUTFILE}"
cp "/mnt/iusers01/jf01/w10944rb/Abaqus/${PLASTICITYDATA}"  "/mnt/iusers01/jf01/w10944rb/scratch/${OUTPUTFILE}"
cp "/mnt/iusers01/jf01/w10944rb/${SUBFOLDER}${MODEL}"  "/mnt/iusers01/jf01/w10944rb/scratch/${OUTPUTFILE}/Quad_plasticity.inp"
cd $OUTPUTFILE
python "/mnt/iusers01/jf01/w10944rb/${SUBFOLDER}${MAINSCRIPT}" "${Temp_C}" "${SR}" "${βtransus}" "${initial_stress_min}" "${initial_stress_max}" "${Q_min}" "${Q_max}" "${m_α_min}" "${m_α_max}" "${m_β_min}" "${m_β_max}" "${n_α_min}" "${n_α_max}" "${n_β_min}" "${n_β_max}" "${Q_α_min}" "${Q_α_max}" $"{B_min}" $"{B_max}" $"{a_min}" $"{a_max}" $"{b_min}" $"{b_max}" $"{runs}" $"{friction}" $"{conductance}" $"{IMPORTTEMPDB}" $"{power}"