Shelly 1 mini gen3 - input with button not switch

[carlitzt]

Hi all,
I need a smart hint, how the has script should look like, if I want to connect a button to the mini gen3 and not a switch.
Required action:

• pressing the button will activate the relay
• Releasing the button
• Press the button again will deactivate the relay

The button is connected to the standard connector of the mini.

any help is appreciated

regards Thomas

[carlitzt]

Button means temporary switch.

[RavenSystem]

This:

{"c":{"io":[[[7,0],2],[[1],6,1],[[10],6,0,1],[[3],10,0,3]],"l":0,"b":[[1,5]]},"a":[{"0":{"r":[[7]]},"1":{"r":[[7,1]]},"b":[[10],[1]],"es":[{"t":22,"h":2,"n":5,"g":3,"j":10,"y0":[{"v":75,"r":1,"0":{"m":[[1]]}}]}]}]}

And this, if you want to use double and long press button with scenes:

{"c":{"io":[[[7,0],2],[[1],6,1],[[10],6,0,1],[[3],10,0,3]],"l":0,"b":[[1,5]]},"a":[{"0":{"r":[[7]]},"1":{"r":[[7,1]]},"b":[[10],[1]],"es":[{"t":22,"h":2,"n":5,"g":3,"j":10,"y0":[{"v":75,"r":1,"0":{"m":[[1]]}}]}]},{"t":3,"f1":[[10,2]],"f2":[[10,3]]}]}

[carlitzt]

Thanks for the fast response. It works!!!!

Strange is, that I updated the shelly using the firmware upload function within the shelly app with the Mini1G3.zip file from
the GITHUB release page and it did not work. The device was not responding. Did it two times, both Shellys were not working
after uploading the zip file. Is it needed to perform a firmware upgrade to the latest Shelly firmware before uploading the Mini1G3.zip file?