From 18fab7f685abd078caa6597381597db3fbfe1608 Mon Sep 17 00:00:00 2001
From: Jerome <poirt1+git@gmail.com>
Date: Wed, 1 Sep 2021 23:43:18 +0200
Subject: [PATCH] Fix for Einsy no z_tilt

---
 .../Prusa_Universal_Config_Revised/Macros/start_print.cfg | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/Klipper_cfg/Prusa_Universal_Config_Revised/Macros/start_print.cfg b/Klipper_cfg/Prusa_Universal_Config_Revised/Macros/start_print.cfg
index 4ac1bae..7ef64e2 100644
--- a/Klipper_cfg/Prusa_Universal_Config_Revised/Macros/start_print.cfg
+++ b/Klipper_cfg/Prusa_Universal_Config_Revised/Macros/start_print.cfg
@@ -49,9 +49,11 @@ gcode:
     # wait for bed temp
     M190 S{BED_TEMP}
     # Z_Tilt + mesh 
-    {% if printer.z_tilt.applied is false %}
-    Z_TILT_ADJUST
-    {% endif %}
+	{% if printer["gcode_macro _stepper_type"].tmc2209|int == 1 %}
+		{% if printer.z_tilt.applied is false %}
+		Z_TILT_ADJUST
+		{% endif %}
+	{% endif %}
     {% if printer.bed_mesh.profile_name == "" %}
     G80
     {% endif %}