Problem Installing Perl on Z/OS USS

[p5pRT]

Migrated from rt.perl.org#43693 (status was 'stalled')

Searchable as RT43693$

[p5pRT]

From Sowdarmendran_Ananthraj@rcomext.com

Hi,

I get the below error when i try to "make" after "sh Configure", when i am
trying to install Perl on Z/OS USS.

AMKANT@​CH01PROD​:/home/amkant/db2perl/perl-5.8.8​: >make test
`sh cflags "optimize=''" perly.o` perly.c
  CCCMD = c89 -DPERL_CORE -c -DMAXSIG=38 -DOEMVS -D_OE_SOCKETS
-D_XOPEN_SOURCE_EXTENDED -D_ALL_SOURCE -DYYDYNAMIC -I/usr/local/include -W
0,float(ieee)
ERROR CCN3046 /home/amkant/db2perl/perl-5.8.8/perly.c​:301 Syntax error.
ERROR CCN3272 /home/amkant/db2perl/perl-5.8.8/perly.c​:301 Identifier not
allowed in cast or sizeof declarations.
ERROR CCN3117 /home/amkant/db2perl/perl-5.8.8/perly.c​:301 Operand must be
a scalar type.
ERROR CCN3046 /home/amkant/db2perl/perl-5.8.8/perly.c​:302 Syntax error.
ERROR CCN3272 /home/amkant/db2perl/perl-5.8.8/perly.c​:302 Identifier not
allowed in cast or sizeof declarations.
CCN0793(I) Compilation failed for file ./perly.c. Object file not created.
FSUM3065 The COMPILE step ended with return code 12.
FSUM3017 Could not compile perly.c. Correct the errors and try again.
make​: *** [perly.o] Error 3
AMKANT@​CH01PROD​:/home/amkant/db2perl/perl-5.8.8​: >export _C89_CCMODE=1
AMKANT@​CH01PROD​:/home/amkant/db2perl/perl-5.8.8​: >make
`sh cflags "optimize=''" perly.o` perly.c
  CCCMD = c89 -DPERL_CORE -c -DMAXSIG=38 -DOEMVS -D_OE_SOCKETS
-D_XOPEN_SOURCE_EXTENDED -D_ALL_SOURCE -DYYDYNAMIC -I/usr/local/include -W
0,float(ieee)
ERROR CCN3046 /home/amkant/db2perl/perl-5.8.8/perly.c​:301 Syntax error.
ERROR CCN3272 /home/amkant/db2perl/perl-5.8.8/perly.c​:301 Identifier not
allowed in cast or sizeof declarations.
ERROR CCN3117 /home/amkant/db2perl/perl-5.8.8/perly.c​:301 Operand must be
a scalar type.
ERROR CCN3046 /home/amkant/db2perl/perl-5.8.8/perly.c​:302 Syntax error.
ERROR CCN3272 /home/amkant/db2perl/perl-5.8.8/perly.c​:302 Identifier not
allowed in cast or sizeof declarations.
CCN0793(I) Compilation failed for file ./perly.c. Object file not created.
FSUM3065 The COMPILE step ended with return code 12.
FSUM3017 Could not compile perly.c. Correct the errors and try again.
make​: *** [perly.o] Error 3
AMKANT@​CH01PROD​:/home/amkant/db2perl/perl-5.8.8​: >make install
make install.perl install.man STRIPFLAGS= DESTDIR=""
make[1]​: Entering directory `/home/amkant/db2perl/perl-5.8.8'
`sh cflags "optimize=''" perly.o` perly.c
  CCCMD = c89 -DPERL_CORE -c -DMAXSIG=38 -DOEMVS -D_OE_SOCKETS
-D_XOPEN_SOURCE_EXTENDED -D_ALL_SOURCE -DYYDYNAMIC -I/usr/local/include -W
0,float(ieee)
ERROR CCN3046 /home/amkant/db2perl/perl-5.8.8/perly.c​:301 Syntax error.
ERROR CCN3272 /home/amkant/db2perl/perl-5.8.8/perly.c​:301 Identifier not
allowed in cast or sizeof declarations.
ERROR CCN3117 /home/amkant/db2perl/perl-5.8.8/perly.c​:301 Operand must be
a scalar type.
ERROR CCN3046 /home/amkant/db2perl/perl-5.8.8/perly.c​:302 Syntax error.
ERROR CCN3272 /home/amkant/db2perl/perl-5.8.8/perly.c​:302 Identifier not
allowed in cast or sizeof declarations.
CCN0793(I) Compilation failed for file ./perly.c. Object file not created.
FSUM3065 The COMPILE step ended with return code 12.
FSUM3017 Could not compile perly.c. Correct the errors and try again.
make[1]​: *** [perly.o] Error 3
make[1]​: Leaving directory `/home/amkant/db2perl/perl-5.8.8'
make​: *** [install] Error 2
AMKANT@​CH01PROD​:/home/amkant/db2perl/perl-5.8.8​: >

Request your help in getting this resolved.

Thanks and Regards,
Sowdar
Sowdarmendran Anantharaj | TCS | DB2 Database Adminstrator | Under Contract
:
Swiss Reinsurance Company | 175 King Street, Armonk, New York, 10504, USA
Direct​: +1-914-828-6164 | Mobile​: +1-913-940-5522 | E-mail​:
sowdarmendran_ananthraj@​rcomext.com

This e-mail, including attachments, is intended for the person(s) or
company named and may contain confidential and/or legally privileged
information. Unauthorized disclosure, copying or use of this information
may be unlawful and is prohibited. If you are not the intended recipient,
please delete this message and notify the sender.
All incoming and outgoing e-mail messages are stored in the Swiss Re
Electronic Message Repository. If you do not wish the retention of
potentially private e-mails by Swiss Re, we strongly advise you not to use
the Swiss Re e-mail account for any private, non-business related
communications.

[p5pRT]

From @smpeters

On Mon Jul 09 07​:51​:35 2007, Sowdarmendran_Ananthraj@​rcomext.com wrote​:

Hi,

I get the below error when i try to "make" after "sh Configure", when
i am
trying to install Perl on Z/OS USS.

AMKANT@​CH01PROD​:/home/amkant/db2perl/perl-5.8.8​: >make test
`sh cflags "optimize=''" perly.o` perly.c
CCCMD = c89 -DPERL_CORE -c -DMAXSIG=38 -DOEMVS -D_OE_SOCKETS
-D_XOPEN_SOURCE_EXTENDED -D_ALL_SOURCE -DYYDYNAMIC -I/usr/local/include -W
0,float(ieee)
ERROR CCN3046 /home/amkant/db2perl/perl-5.8.8/perly.c​:301 Syntax error.
ERROR CCN3272 /home/amkant/db2perl/perl-5.8.8/perly.c​:301 Identifier not
allowed in cast or sizeof declarations.
ERROR CCN3117 /home/amkant/db2perl/perl-5.8.8/perly.c​:301 Operand
must be
a scalar type.
ERROR CCN3046 /home/amkant/db2perl/perl-5.8.8/perly.c​:302 Syntax error.
ERROR CCN3272 /home/amkant/db2perl/perl-5.8.8/perly.c​:302 Identifier not
allowed in cast or sizeof declarations.
CCN0793(I) Compilation failed for file ./perly.c. Object file not
created.
FSUM3065 The COMPILE step ended with return code 12.
FSUM3017 Could not compile perly.c. Correct the errors and try again.
make​: *** [perly.o] Error 3
AMKANT@​CH01PROD​:/home/amkant/db2perl/perl-5.8.8​: >export _C89_CCMODE=1
AMKANT@​CH01PROD​:/home/amkant/db2perl/perl-5.8.8​: >make
`sh cflags "optimize=''" perly.o` perly.c
CCCMD = c89 -DPERL_CORE -c -DMAXSIG=38 -DOEMVS -D_OE_SOCKETS
-D_XOPEN_SOURCE_EXTENDED -D_ALL_SOURCE -DYYDYNAMIC -I/usr/local/include -W
0,float(ieee)
ERROR CCN3046 /home/amkant/db2perl/perl-5.8.8/perly.c​:301 Syntax error.
ERROR CCN3272 /home/amkant/db2perl/perl-5.8.8/perly.c​:301 Identifier not
allowed in cast or sizeof declarations.
ERROR CCN3117 /home/amkant/db2perl/perl-5.8.8/perly.c​:301 Operand
must be
a scalar type.
ERROR CCN3046 /home/amkant/db2perl/perl-5.8.8/perly.c​:302 Syntax error.
ERROR CCN3272 /home/amkant/db2perl/perl-5.8.8/perly.c​:302 Identifier not
allowed in cast or sizeof declarations.
CCN0793(I) Compilation failed for file ./perly.c. Object file not
created.
FSUM3065 The COMPILE step ended with return code 12.
FSUM3017 Could not compile perly.c. Correct the errors and try again.
make​: *** [perly.o] Error 3
AMKANT@​CH01PROD​:/home/amkant/db2perl/perl-5.8.8​: >make install
make install.perl install.man STRIPFLAGS= DESTDIR=""
make[1]​: Entering directory `/home/amkant/db2perl/perl-5.8.8'
`sh cflags "optimize=''" perly.o` perly.c
CCCMD = c89 -DPERL_CORE -c -DMAXSIG=38 -DOEMVS -D_OE_SOCKETS
-D_XOPEN_SOURCE_EXTENDED -D_ALL_SOURCE -DYYDYNAMIC -I/usr/local/include -W
0,float(ieee)
ERROR CCN3046 /home/amkant/db2perl/perl-5.8.8/perly.c​:301 Syntax error.
ERROR CCN3272 /home/amkant/db2perl/perl-5.8.8/perly.c​:301 Identifier not
allowed in cast or sizeof declarations.
ERROR CCN3117 /home/amkant/db2perl/perl-5.8.8/perly.c​:301 Operand
must be
a scalar type.
ERROR CCN3046 /home/amkant/db2perl/perl-5.8.8/perly.c​:302 Syntax error.
ERROR CCN3272 /home/amkant/db2perl/perl-5.8.8/perly.c​:302 Identifier not
allowed in cast or sizeof declarations.
CCN0793(I) Compilation failed for file ./perly.c. Object file not
created.
FSUM3065 The COMPILE step ended with return code 12.
FSUM3017 Could not compile perly.c. Correct the errors and try again.
make[1]​: *** [perly.o] Error 3
make[1]​: Leaving directory `/home/amkant/db2perl/perl-5.8.8'
make​: *** [install] Error 2
AMKANT@​CH01PROD​:/home/amkant/db2perl/perl-5.8.8​: >

Request your help in getting this resolved.

Thanks and Regards,
Sowdar

Sorry for taking so long to get back to you. This bug does have me
rather confused, though. Its happening right in the middle of a array
generated out of perly.y. I see no reason for that error to occur.

Steve Peters

[p5pRT]

The RT System itself - Status changed from 'new' to 'open'

[p5pRT]

@iabyn - Status changed from 'open' to 'stalled'