Problem with continuous disconnections

[Lukign0]

Hi everyone, this is my first time posting and asking for help, but I can't seem to find a solution to my problem.
My problem is continuous disconnections every 2 minutes and this has been happening since I switched from running homeassistant on docker desktop installed on Windows to a n150 minipc on which I installed HAOS directly.
Before the switch, I didn't experience any disconnections. The IP150 firmware remained the same, and the PAI configuration didn't change, except for a few small changes to the MQTT section. I can't figure out what the problem is, and even after running the problem through various AIs, the answers are varied; some blame the IP150, others the connection. The mini PC is connected directly to the router via Ethernet cable, just like when it was running on Docker Desktop. The only configuration change compared to Docker Desktop is that I added a Zigbee coordinator and installed the Zigbee2MQTT component. I welcome any suggestions or tests.
I'm also leaving a piece of the log, maybe it can be useful and I hope it's not too long. If so, I apologize to everyone in advance.

2025-08-27 22:39:49,723 - INFO - PAI.paradox.hardware.panel - Updating Labels from Panel
2025-08-27 22:39:51,585 - INFO - PAI.paradox.hardware.panel - Zone labels loaded (1.86s): TMP24H CENTRALE, PORTA INGRESSO, PORTA TAVERNA, PORTA FINES.SALA, PERS.PO.FIN.SALA, FINESTRA SALA, PERSIANA SALA, FINESTRA CUCINA, PERSIANA CUCINA, FINESTRA BAGNO, PERSIANA BAGNO, RILEVAT.SERVIZIO, RILEVATORE NOTTE, RILEVAT. TAVERNA, RIL. EST. GARAGE, RIL. EST.SCIVOLO, TMP24H RIV.SCIVO, RIL.EST.GIARDINO, TMP24H RIV.GIARD, RIL.EST.INGRESSO, TMP24H RIV.INGRE, RIV EST CAMERA, RIV EST CAM.TTA
2025-08-27 22:39:52,061 - INFO - PAI.paradox.hardware.panel - Pgm labels loaded (0.48s): Sirena, PGM 02, PGM 03, PGM 04, PGM 05
2025-08-27 22:39:52,761 - INFO - PAI.paradox.hardware.panel - Partition labels loaded (0.7s): CASA, ESTERNO, RIV EST 1 PIANO
2025-08-27 22:39:53,028 - INFO - PAI.paradox.hardware.panel - User labels loaded (0.27s): Luca, Laura, Giuseppe, Alice, User 005, User 006
2025-08-27 22:39:53,029 - INFO - PAI.paradox.hardware.panel - Module labels loaded (0.0s):
2025-08-27 22:39:53,029 - INFO - PAI.paradox.hardware.panel - Door labels loaded (0.0s):
2025-08-27 22:39:53,029 - INFO - PAI.paradox.paradox - Running
2025-08-27 22:40:56,158 - INFO - PAI.paradox.paradox - Disconnecting from the Alarm Panel
2025-08-27 22:40:56,158 - INFO - PAI.paradox.paradox - Clean Session
2025-08-27 22:40:56,158 - INFO - PAI.paradox.paradox - Cleaning previous session. Closing connection
2025-08-27 22:40:56,161 - ERROR - PAI.paradox.connections.protocols - Connection was closed: None
2025-08-27 22:40:56,161 - ERROR - PAI.paradox.connections.connection - Connection was lost
2025-08-27 22:40:56,162 - INFO - PAI.paradox.paradox - Disconnected from the Alarm Panel
2025-08-27 22:40:56,263 - ERROR - PAI - Connection to panel lost: Not connected. Restarting
2025-08-27 22:40:56,264 - INFO - PAI - Starting...
2025-08-27 22:40:56,264 - INFO - PAI.paradox.paradox - Disconnecting from the Alarm Panel
2025-08-27 22:40:56,264 - INFO - PAI.paradox.paradox - Clean Session
2025-08-27 22:40:56,265 - INFO - PAI.paradox.paradox - Connecting to interface
2025-08-27 22:40:56,265 - INFO - PAI.paradox.connections.ip.connection - Connecting. Try 1/3
2025-08-27 22:40:56,515 - INFO - PAI.paradox.connections.connection - Connection established
2025-08-27 22:40:56,516 - INFO - PAI.paradox.connections.ip.commands - Authenticating with IP Module
2025-08-27 22:40:56,621 - INFO - PAI.paradox.connections.ip.commands - Authentication Success. IP(IP150) Module version 20, firmware: 5.2, serial: 7109f127
2025-08-27 22:40:57,627 - INFO - PAI.paradox.connections.ip.commands - Session successfully established with IP Module
2025-08-27 22:40:57,627 - INFO - PAI.paradox.paradox - Connecting to Panel
2025-08-27 22:40:57,675 - INFO - PAI.paradox.paradox - Panel Identified EVOHD version 7.70 build 12
2025-08-27 22:40:57,675 - INFO - PAI.paradox.paradox - Initiating panel connection
2025-08-27 22:40:57,709 - INFO - PAI.paradox.hardware.evo.panel - Installer login
2025-08-27 22:40:57,739 - INFO - PAI.paradox.hardware.evo.panel - Authentication Success
2025-08-27 22:40:57,739 - INFO - PAI.paradox.paradox - Connection OK
2025-08-27 22:40:57,739 - INFO - PAI.paradox.paradox - Loading data from panel memory
2025-08-27 22:40:57,739 - INFO - PAI.paradox.hardware.panel - Loading definitions
2025-08-27 22:40:57,740 - INFO - PAI.paradox.hardware.panel - Updating Definitions from Panel
2025-08-27 22:40:58,446 - INFO - PAI.paradox.hardware.panel - Zone definitions loaded (0.71s)
2025-08-27 22:40:58,493 - INFO - PAI.paradox.hardware.panel - Partition definitions loaded (0.05s)
2025-08-27 22:41:08,872 - ERROR - PAI.paradox.lib.handlers - No handler for message 5
Detail: Container:
fields = Container:
data = b'RC\x00\x00\x14\x9c\x00\x00\x00H\x00\x00\x00\x00\x00\x00'... (truncated, total 66)
value = Container:
po = Container:
command = 5
status = Container:
reserved = False
alarm_reporting_pending = False
Winload_connected = True
NeWare_connected = False
packet_length = 67
control = Container:
ram_access = False
bus_address = 0
address = 5276
data = b'\x00\x00\x00H\x00\x00\x00\x00\x00\x00\x00\x00\x00H\x00\x00'... (truncated, total 60)
offset1 = 0
offset2 = 66
length = 66
checksum = b'\xf5' (total 1)
2025-08-27 22:41:32,009 - INFO - PAI.paradox.hardware.panel - User definitions loaded (33.52s)

[yozik04]

Can you try unplugging IP150 from the panel and plugging it back after some seconds. Let's power circle it. What it's firmware version? Do you use local connection?

[Lukign0]

Good morning. So, I have version 5.02.070 and I use a local connection. I tried rebooting and even unplugging the module, but to no avail. However, since I'm stubborn and don't stop trying until I succeed, I barely slept last night, and I found a solution. I took the pai.conf of the docker desktop (the one that works) and copied it internally into the pai.yaml of the add-on, adjusting the indentation and the whole structure by removing { " [ and everything that is not needed in the add-on configuration. Then I fixed the part relating to the mqtt by inserting the correct values and restarted. as of now, about 6 hours, no disconnections . let's hope it's a permanent solution. Thanks anyway for the reply and the help.

[yozik04]

Don't think it mattered, but let's see.

[Lukign0]

Hi, just wanted to confirm that after 4 days no disconnection.