Skip to content

Latest commit

 

History

History
163 lines (128 loc) · 5.03 KB

README.md

File metadata and controls

163 lines (128 loc) · 5.03 KB

pH Click

pH Click demo application is developed using the NECTO Studio, ensuring compatibility with mikroSDK's open-source libraries and tools. Designed for plug-and-play implementation and testing, the demo is fully compatible with all development, starter, and mikromedia boards featuring a mikroBUS™ socket.

Click Library

  • Author : Stefan Ilic
  • Date : Oct 2021.
  • Type : UART type

Software Support

Example Description

This example reads and processes data from pH Clicks.

Example Libraries

  • MikroSDK.Board
  • MikroSDK.Log
  • Click.pH

Example Key Functions

  • ph_cfg_setup Config Object Initialization function.
void ph_cfg_setup ( ph_cfg_t *cfg );
  • ph_init Initialization function.
err_t ph_init ( ph_t *ctx, ph_cfg_t *cfg );
  • ph_default_cfg Click Default Configuration function.
err_t ph_default_cfg ( ph_t *ctx );
  • ph_send_cmd Send command function.
void ph_send_cmd ( ph_t *ctx, char *p_cmd );
  • ph_get_cmd_resp Send get response function.
void ph_get_cmd_resp ( ph_t *ctx, char *p_cmd, char *p_resp );
  • ph_switch_led Toggle LED function.
void ph_switch_led ( ph_t *ctx, uint8_t state, char *p_resp );

Application Init

Initializes UART driver, performing a factory reset of the device, disabling continuous read, and performing calibration at the midpoint on the pH scale.

void application_init ( void ) 
{
    log_cfg_t log_cfg;  /**< Logger config object. */
    ph_cfg_t ph_cfg;  /**< Click config object. */

    /** 
     * Logger initialization.
     * Default baud rate: 115200
     * Default log level: LOG_LEVEL_DEBUG
     * @note If USB_UART_RX and USB_UART_TX 
     * are defined as HAL_PIN_NC, you will 
     * need to define them manually for log to work. 
     * See @b LOG_MAP_USB_UART macro definition for detailed explanation.
     */
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, " Application Init " );

    // Click initialization.
    ph_cfg_setup( &ph_cfg );
    PH_MAP_MIKROBUS( ph_cfg, MIKROBUS_1 );
    if ( UART_ERROR == ph_init( &ph, &ph_cfg ) ) 
    {
        log_error( &logger, " Communication init." );
        for ( ; ; );
    }
    
    ph_factory_rst( &ph, app_buf );
    Delay_ms ( 1000 );
    
    ph_cont_read( &ph, 0, app_buf );
    log_printf( &logger, "-----------------------\r\n" );
    log_printf( &logger, "   -- Initialized --   \r\n" );
    log_printf( &logger, "-----------------------\r\n" );
    log_printf( &logger, "  Place probe into pH  \r\n" );
    log_printf( &logger, " neutral substance for \r\n" );
    log_printf( &logger, " mid point calibration \r\n" );
    log_printf( &logger, "-----------------------\r\n" );
    for ( uint8_t n_cnt = 0; n_cnt < 20; n_cnt++ )
    {
        Delay_ms ( 1000 );
    }
    log_printf( &logger, " Starting calibration  \r\n" );
    log_printf( &logger, "-----------------------\r\n" );
    ph_perf_calib ( &ph, PH_CMD_CALIB_MID, 7.000, app_buf );
    Delay_ms ( 1000 );
    log_printf( &logger, " Calibration done!     \r\n" );
    log_printf( &logger, "-----------------------\r\n" );
    
    log_printf( &logger, " - Application  task -\r\n" );
    log_printf( &logger, "-----------------------\r\n" );
    ph_send_cmd( &ph, PH_CMD_DIS_RSP_CODES );
    Delay_ms ( 1000 );
    ph_clr_log_buf( app_buf );
}

Application Task

This example shows the capabilities of the pH Click board by performing a reading of the pH value of the substance in which the probe is submerged and displaying readings via the USART terminal.

void application_task ( void ) 
{
    ph_send_cmd ( &ph, PH_CMD_SET_SNGL_READ );
    ph_response( &ph, app_buf );
    log_printf( &logger, " pH value: %s ", app_buf );
    log_printf( &logger, "-----------------------\r\n" );
    ph_clr_log_buf( app_buf );
    Delay_ms ( 1000 );
}

Application Output

This Click board can be interfaced and monitored in two ways:

  • Application Output - Use the "Application Output" window in Debug mode for real-time data monitoring. Set it up properly by following this tutorial.
  • UART Terminal - Monitor data via the UART Terminal using a USB to UART converter. For detailed instructions, check out this tutorial.

Additional Notes and Information

The complete application code and a ready-to-use project are available through the NECTO Studio Package Manager for direct installation in the NECTO Studio. The application code can also be found on the MIKROE GitHub account.