magneto13

---

Magneto 13 Click

Magneto 13 Click demo application is developed using the NECTO Studio, ensuring compatibility with mikroSDK's open-source libraries and tools. Designed for plug-and-play implementation and testing, the demo is fully compatible with all development, starter, and mikromedia boards featuring a mikroBUS™ socket.

---

Click Library

• Author : Nenad Filipovic
• Date : Apr 2023.
• Type : SPI type

Software Support

Example Description

This library contains API for the Magneto 13 Click driver. The demo application reads and displays the magnet's angular position in degrees.

Example Libraries

• MikroSDK.Board
• MikroSDK.Log
• Click.Magneto13

Example Key Functions

• magneto13_cfg_setup Config Object Initialization function.

void magneto13_cfg_setup ( magneto13_cfg_t *cfg );

• magneto13_init Initialization function.

err_t magneto13_init ( magneto13_t *ctx, magneto13_cfg_t *cfg );

• magneto13_default_cfg Click Default Configuration function.

err_t magneto13_default_cfg ( magneto13_t *ctx );

• magneto13_get_angle Magneto 13 gets the angular position function.

err_t magneto13_get_angle ( magneto13_t *ctx, float *angle );

• magneto13_get_field_strength Magneto 13 gets the magnetic field strength function.

err_t magneto13_get_field_strength ( magneto13_t *ctx, uint8_t *field_strength );

• magneto13_set_mag_field_thd Magneto 13 sets the magnetic field threshold function.

err_t magneto13_set_mag_field_thd ( magneto13_t *ctx, uint8_t mglt, uint8_t mght );

Application Init

Initialization of SPI module and log UART. After driver initialization, the app executes a default configuration.

void application_init ( void )
{
    log_cfg_t log_cfg;  /**< Logger config object. */
    magneto13_cfg_t magneto13_cfg;  /**< Click config object. */

    /** 
     * Logger initialization.
     * Default baud rate: 115200
     * Default log level: LOG_LEVEL_DEBUG
     * @note If USB_UART_RX and USB_UART_TX 
     * are defined as HAL_PIN_NC, you will 
     * need to define them manually for log to work. 
     * See @b LOG_MAP_USB_UART macro definition for detailed explanation.
     */
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, " Application Init " );

    // Click initialization.
    magneto13_cfg_setup( &magneto13_cfg );
    MAGNETO13_MAP_MIKROBUS( magneto13_cfg, MIKROBUS_1 );
    if ( SPI_MASTER_ERROR == magneto13_init( &magneto13, &magneto13_cfg ) )
    {
        log_error( &logger, " Communication init." );
        for ( ; ; );
    }
    
    if ( MAGNETO13_ERROR == magneto13_default_cfg ( &magneto13 ) )
    {
        log_error( &logger, " Default configuration." );
        for ( ; ; );
    }
    
    log_info( &logger, " Application Task " );
    log_printf( &logger, " -------------------- \r\n" );
    Delay_ms ( 100 );
}

Application Task

This example demonstrates the use of the Magneto 13 Click board™. Reads and displays the magnet's angular position in degrees. Results are being sent to the UART Terminal, where you can track their changes.

void application_task ( void )
{
    static uint8_t field_strength = 0;
    static float angle = 0;
    if ( MAGNETO13_OK == magneto13_get_field_strength( &magneto13, &field_strength ) )
    {
        if ( ( MAGNETO13_FLD_ST_OK == field_strength ) && ( MAGNETO13_OK == magneto13_get_angle( &magneto13, &angle ) ) )
        {
            log_printf( &logger, " Angle: %.2f [deg]\r\n", angle );
            log_printf( &logger, " -------------------- \r\n" );
            Delay_ms ( 1000 );
        }
    }
}

Application Output

This Click board can be interfaced and monitored in two ways:

• Application Output - Use the "Application Output" window in Debug mode for real-time data monitoring. Set it up properly by following this tutorial.
• UART Terminal - Monitor data via the UART Terminal using a USB to UART converter. For detailed instructions, check out this tutorial.

Additional Notes and Information

The complete application code and a ready-to-use project are available through the NECTO Studio Package Manager for direct installation in the NECTO Studio. The application code can also be found on the MIKROE GitHub account.

---