qt-dab does not load a new .txdata.tii

[Frank-56]

Hi Jan,

I'm not quite sure about which version I'm talking, it installs in qt-dab64-6.8, but shows qt-dab64-6.9 in the main widget, so I suppose 6.9 ...

"refresh table" in 6.9/64 and 6,9/32 does nothing, while "load table" in 6.x/32 and 6.8/32 works well and a messagebox tells me a new table has been loaded. No new .txdata.tii in 6.9, new .txdata.tii in 6.8.

Cheers
Frank

[JvanKatwijk]

T\The "refresh table" button assumed a database is in the user's homedirectory - loaded by the db-loader which is now a separate program - a then refreshes the copy of the database the system is running with Op vr 14 feb 2025 om 16:07 schreef Frank-56 ***@***.***>:

…

Hi Jan, I'm not quite sure about which version I'm talking, it installs in qt-dab64-6.*8*, but shows qt-dab64-6.*9* in the main widget, so I suppose 6.9 ... "refresh table" in 6.9/64 and 6,9/32 does nothing, while "load table" in 6.x/32 and 6.8/32 works well and a messagebox tells me a new table has been loaded. No new .txdata.tii in 6.9, new .txdata.tii in 6.8. Cheers Frank — Reply to this email directly, view it on GitHub <#352>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ACCPHQER722KCNWMX5XJ65T2PYBB3AVCNFSM6AAAAABXE2XCVKVHI2DSMVQWIX3LMV43ASLTON2WKOZSHA2TGOJVGM3DMOI> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***> [image: Frank-56]*Frank-56* created an issue (JvanKatwijk/qt-dab#352) <#352> Hi Jan, I'm not quite sure about which version I'm talking, it installs in qt-dab64-6.*8*, but shows qt-dab64-6.*9* in the main widget, so I suppose 6.9 ... "refresh table" in 6.9/64 and 6,9/32 does nothing, while "load table" in 6.x/32 and 6.8/32 works well and a messagebox tells me a new table has been loaded. No new .txdata.tii in 6.9, new .txdata.tii in 6.8. Cheers Frank — Reply to this email directly, view it on GitHub <#352>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ACCPHQER722KCNWMX5XJ65T2PYBB3AVCNFSM6AAAAABXE2XCVKVHI2DSMVQWIX3LMV43ASLTON2WKOZSHA2TGOJVGM3DMOI> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

-- Jan van Katwijk

[Frank-56]

Thanks Jan,

was not clear to me. Now works of course.

But there is a general issue with getting new data from fmlist: In case a VPN like Cyberghost or so is active, fmlist denies to give new data and the resulting ,txdata.tii is only 100 bytes large, although it says "Download succeeded". Qirx faces the same issue and fmlist denies me to log in when running with a VPN.

When I click "Push voor download" more than one time, the .txdata.tii gets larger and larger on each click, think you append. Only when I close dbloader and start it again, it has the initial size of 705k at the moment.

There more on tii to come, but I must fully figure out first.

[JvanKatwijk]

The very first version of the dbloader had that probem, in later versions that was solved (I think, I;; have a look) Op zo 16 feb 2025 om 14:43 schreef Frank-56 ***@***.***>:

…

Thanks Jan, was not clear to me. Now works of course. But there is a general issue with getting new data from fmlist: In case a VPN like Cyberghost or so is active, fmlist denies to give new data and the resulting ,txdata.tii is only 100 bytes large, although it says "Download succeeded". Qirx faces the same issue and fmlist denies me to log in when running with a VPN. When I click "Push voor download" more than one time, the .txdata.tii gets larger and larger on each click, think you append. Only when I close dbloader and start it again, it has the initial size of 705k at the moment. There more on tii to come, but I must fully figure out first. — Reply to this email directly, view it on GitHub <#352 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ACCPHQFRQWVEF7HRJFO3W3T2QCIW3AVCNFSM6AAAAABXE2XCVKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMNRRGQZTQNBZG4> . You are receiving this because you commented.Message ID: ***@***.***> [image: Frank-56]*Frank-56* left a comment (JvanKatwijk/qt-dab#352) <#352 (comment)> Thanks Jan, was not clear to me. Now works of course. But there is a general issue with getting new data from fmlist: In case a VPN like Cyberghost or so is active, fmlist denies to give new data and the resulting ,txdata.tii is only 100 bytes large, although it says "Download succeeded". Qirx faces the same issue and fmlist denies me to log in when running with a VPN. When I click "Push voor download" more than one time, the .txdata.tii gets larger and larger on each click, think you append. Only when I close dbloader and start it again, it has the initial size of 705k at the moment. There more on tii to come, but I must fully figure out first. — Reply to this email directly, view it on GitHub <#352 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ACCPHQFRQWVEF7HRJFO3W3T2QCIW3AVCNFSM6AAAAABXE2XCVKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMNRRGQZTQNBZG4> . You are receiving this because you commented.Message ID: ***@***.***>

-- Jan van Katwijk

[JvanKatwijk]

https://www.dropbox.com/scl/fi/9lgn26petyl5a40vzdvri/setup-qt-db-loader.exe?rlkey=bgz1i0wevmnwj1lic67xuurvv&dl=0 probeer deze is, die geeft hier een resultaat van iets meer dan 77000, ongeacht het aantal keren dat je hem aanklikt Op ma 17 feb 2025 om 13:13 schreef jan van katwijk ***@***.***>:

…

The very first version of the dbloader had that probem, in later versions that was solved (I think, I;; have a look) Op zo 16 feb 2025 om 14:43 schreef Frank-56 ***@***.***>: > Thanks Jan, > > was not clear to me. Now works of course. > > But there is a general issue with getting new data from fmlist: In case a > VPN like Cyberghost or so is active, fmlist denies to give new data and the > resulting ,txdata.tii is only 100 bytes large, although it says "Download > succeeded". Qirx faces the same issue and fmlist denies me to log in when > running with a VPN. > > When I click "Push voor download" more than one time, the .txdata.tii > gets larger and larger on each click, think you append. Only when I close > dbloader and start it again, it has the initial size of 705k at the moment. > > There more on tii to come, but I must fully figure out first. > > — > Reply to this email directly, view it on GitHub > <#352 (comment)>, > or unsubscribe > <https://github.com/notifications/unsubscribe-auth/ACCPHQFRQWVEF7HRJFO3W3T2QCIW3AVCNFSM6AAAAABXE2XCVKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMNRRGQZTQNBZG4> > . > You are receiving this because you commented.Message ID: > ***@***.***> > [image: Frank-56]*Frank-56* left a comment (JvanKatwijk/qt-dab#352) > <#352 (comment)> > > Thanks Jan, > > was not clear to me. Now works of course. > > But there is a general issue with getting new data from fmlist: In case a > VPN like Cyberghost or so is active, fmlist denies to give new data and the > resulting ,txdata.tii is only 100 bytes large, although it says "Download > succeeded". Qirx faces the same issue and fmlist denies me to log in when > running with a VPN. > > When I click "Push voor download" more than one time, the .txdata.tii > gets larger and larger on each click, think you append. Only when I close > dbloader and start it again, it has the initial size of 705k at the moment. > > There more on tii to come, but I must fully figure out first. > > — > Reply to this email directly, view it on GitHub > <#352 (comment)>, > or unsubscribe > <https://github.com/notifications/unsubscribe-auth/ACCPHQFRQWVEF7HRJFO3W3T2QCIW3AVCNFSM6AAAAABXE2XCVKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMNRRGQZTQNBZG4> > . > You are receiving this because you commented.Message ID: > ***@***.***> > -- Jan van Katwijk

-- Jan van Katwijk