Dreame L10 Pro "crashes" when attempting to clean/map

[bort9]

Are you already using Valetudo?

Yes, for a long time

Your questions

Been running my rooted L10 Pro (ver 1138, 03/2022) for about 4+ years now and it has been a pretty smooth experience until recently (unit was rooted straight out of the box, without connecting to the manufacturer app) when it suddenly stopped halfway when trying to return back to the dock after a clean.

Putting the unit back into the dock, it seems to power on fine, but as soon as I attempt any cleaning/mapping activity (either Valetudo web GUI or physical button on the vacuum), it:

• No movement from motor.
• Drops off the network (ping dies).
• All 3 LED flashes for a few seconds.
• OS appears to have rebooted - uptime <1 min after SSH back in), but no usual startup audio chime.

The same behaviours were noted regardless when the robot vacuum is connected to the dock, or on battery.

I've tried the following without any change in behaviour:

• Reset robot vacuum via button - Machine reboots, Valetudo binary went missing, had to re-install via SSH.
• Re-install the previously used dustbuilder firmware package.
• Re-install a newly created dustbuilder firmware package.
• Re-install Valetudo in addition to the two firmware re-installations.
• Restoring the post-rooting backup copy of /mnt/private and /mnt/misc folders.

I've noted that #1803 seems to suggest a known hardware problem with these models, despite the behaviour seems almost the same, with the exception that the motor on my unit never moved at all before rebooting.

And the RAM seems to be accounted for:

[root@p2029_release:~]# cat /proc/meminfo 
MemTotal:         490076 kB
MemFree:          194272 kB
MemAvailable:     303856 kB

Any suggestions to what I can try next, or something that I might have missed?

[bort9]

I was able to connect UART to the robot and noted the following logs when trying to initiate a clean:

[root@p2029_release:~]# [340]HELLO! SBOOT is starting!
[343]sboot commit : 9341f18 
NOTICE:  BL3-1: v1.0(debug):b108d89
NOTICE:  BL3-1: Built : 14:13:35, 2020-04-08
NOTICE:  BL3-1 commit: 8
NOTICE:  secure os exist
MESSAGE: [0x0] TEE-CORE: OP-TEE version: 5f533bf9-dirty #1 2020年 08月 08日 星期六 03:04:16 UTC arm
NOTICE:  BL3-1: Preparing for EL3 exit to normal world
NOTICE:  BL3-1: Next image address = 0x4a000000
NOTICE:  BL3-1: Next image spsr = 0x1d3
[01.202][NE]rawnand not support chip 1: 03 03 03 03 03 03 03 03
[01.207][NE]rawnand not support chip 2: 03 03 03 03 03 03 03 03
[01.213][NE]rawnand not support chip 3: 03 03 03 03 03 03 03 03
[01.223]Item0 (Map) magic is bad
[03.159]set disp.dev2_output_type fail. using defval=0
[03.204]secure storage read rpmb_key fail with:-1
[03.208]secure storage read dm_crypt_key fail with:-1
[03.215][ARISC ERROR] :get [allwinner,sunxi-hwspinlock] device node error
[SCP] :sunxi-arisc driver begin startup 2
[SCP] :0x1
[SCP] :arisc version: [ramsm-xt318rnit-1v-a0.0.ler-esaerid-]
[SCP] :arisc startup ready
[SCP] :arisc startup notify message feedback
[SCP] :send hard sync feedback message: 0x900200
[SCP] :sunxi-arisc driver v1.10 is starting
sunxi verify rootfs fail, reboot
[125]HELLO! SBOOT is starting!
[128]sboot commit : 9341f18 
NOTICE:  BL3-1: v1.0(debug):b108d89
NOTICE:  BL3-1: Built : 14:13:35, 2020-04-08
NOTICE:  BL3-1 commit: 8
NOTICE:  secure os exist
MESSAGE: [0x0] TEE-CORE: OP-TEE version: 5f533bf9-dirty #1 2020年 08月 08日 星期六 03:04:16 UTC arm
NOTICE:  BL3-1: Preparing for EL3 exit to normal world
NOTICE:  BL3-1: Next image address = 0x4a000000
NOTICE:  BL3-1: Next image spsr = 0x1d3
[00.985][NE]rawnand not support chip 1: 03 03 03 03 03 03 03 03
[00.991][NE]rawnand not support chip 2: 03 03 03 03 03 03 03 03
[00.996][NE]rawnand not support chip 3: 03 03 03 03 03 03 03 03
[01.007]Item0 (Map) magic is bad
[02.950]set disp.dev2_output_type fail. using defval=0
[02.994]secure storage read rpmb_key fail with:-1
[02.998]secure storage read dm_crypt_key fail with:-1
[03.005][ARISC ERROR] :get [allwinner,sunxi-hwspinlock] device node error
[SCP] :sunxi-arisc driver begin startup 2
[SCP] :0x1
[SCP] :arisc version: [ramsm-xt318rnit-1v-a0.0.ler-esaerid-]
[SCP] :arisc startup ready
[SCP] :arisc startup notify message feedback
[SCP] :send hard sync feedback message: 0x900200
[SCP] :sunxi-arisc driver v1.10 is starting
sunxi verify rootfs fail, reboot
[125]HELLO! SBOOT is starting!
[128]sboot commit : 9341f18 
NOTICE:  BL3-1: v1.0(debug):b108d89
NOTICE:  BL3-1: Built : 14:13:35, 2020-04-08
NOTICE:  BL3-1 commit: 8
NOTICE:  secure os exist
MESSAGE: [0x0] TEE-CORE: OP-TEE version: 5f533bf9-dirty #1 2020年 08月 08日 星期六 03:04:16 UTC arm
NOTICE:  BL3-1: Preparing for EL3 exit to normal world
NOTICE:  BL3-1: Next image address = 0x4a000000
NOTICE:  BL3-1: Next image spsr = 0x1d3
ˇ[00.986][NE]rawnand not support chip 1: 03 03 03 03 03 03 03 03
[00.992][NE]rawnand not support chip 2: 03 03 03 03 03 03 03 03
[00.998][NE]rawnand not support chip 3: 03 03 03 03 03 03 03 03
[01.008]Item0 (Map) magic is bad
[02.955]set disp.dev2_output_type fail. using defval=0
[02.999]secure storage read rpmb_key fail with:-1
[03.004]secure storage read dm_crypt_key fail with:-1
[03.010][ARISC ERROR] :get [allwinner,sunxi-hwspinlock] device node error
[SCP] :sunxi-arisc driver begin startup 2
[SCP] :0x1
[SCP] :arisc version: [ramsm-xt318rnit-1v-a0.0.ler-esaerid-]
[SCP] :arisc startup ready
[SCP] :arisc startup notify message feedback
[SCP] :send hard sync feedback message: 0x900200
[SCP] :sunxi-arisc driver v1.10 is starting
sunxi verify rootfs fail, reboot
[125]HELLO! SBOOT is starting!
[128]sboot commit : 9341f18 
NOTICE:  BL3-1: v1.0(debug):b108d89
NOTICE:  BL3-1: Built : 14:13:35, 2020-04-08
NOTICE:  BL3-1 commit: 8
NOTICE:  secure os exist
MESSAGE: [0x0] TEE-CORE: OP-TEE version: 5f533bf9-dirty #1 2020年 08月 08日 星期六 03:04:16 UTC arm
NOTICE:  BL3-1: Preparing for EL3 exit to normal world
NOTICE:  BL3-1: Next image address = 0x4a000000
NOTICE:  BL3-1: Next image spsr = 0x1d3
[00.990][NE]rawnand not support chip 1: 03 03 03 03 03 03 03 03
[00.996][NE]rawnand not support chip 2: 03 03 03 03 03 03 03 03
[01.002][NE]rawnand not support chip 3: 03 03 03 03 03 03 03 03
[01.012]Item0 (Map) magic is bad
[02.970]set disp.dev2_output_type fail. using defval=0
[03.014]secure storage read rpmb_key fail with:-1
[03.019]secure storage read dm_crypt_key fail with:-1
[03.025][ARISC ERROR] :get [allwinner,sunxi-hwspinlock] device node error
[SCP] :sunxi-arisc driver begin startup 2
[SCP] :0x1
[SCP] :arisc version: [ramsm-xt318rnit-1v-a0.0.ler-esaerid-]
[SCP] :arisc startup ready
[SCP] :arisc startup notify message feedback
[SCP] :send hard sync feedback message: 0x900200
[SCP] :sunxi-arisc driver v1.10 is starting
sunxi verify rootfs fail, reboot
[125]HELLO! SBOOT is starting!
[128]sboot commit : 9341f18 
NOTICE:  BL3-1: v1.0(debug):b108d89
NOTICE:  BL3-1: Built : 14:13:35, 2020-04-08
NOTICE:  BL3-1 commit: 8
NOTICE:  secure os exist
MESSAGE: [0x0] TEE-CORE: OP-TEE version: 5f533bf9-dirty #1 2020年 08月 08日 星期六 03:04:16 UTC arm
NOTICE:  BL3-1: Preparing for EL3 exit to normal world
NOTICE:  BL3-1: Next image address = 0x4a000000
NOTICE:  BL3-1: Next image spsr = 0x1d3
[00.986][NE]rawnand not support chip 1: 03 03 03 03 03 03 03 03
[00.992][NE]rawnand not support chip 2: 03 03 03 03 03 03 03 03
[00.997][NE]rawnand not support chip 3: 03 03 03 03 03 03 03 03
[01.008]Item0 (Map) magic is bad
[02.970]set disp.dev2_output_type fail. using defval=0
[03.014]secure storage read rpmb_key fail with:-1
[03.018]secure storage read dm_crypt_key fail with:-1
[03.025][ARISC ERROR] :get [allwinner,sunxi-hwspinlock] device node error
[SCP] :sunxi-arisc driver begin startup 2
[SCP] :0x1
[SCP] :arisc version: [ramsm-xt318rnit-1v-a0.0.ler-esaerid-]
[SCP] :arisc startup ready
[SCP] :arisc startup notify message feedback
[SCP] :send hard sync feedback message: 0x900200
[SCP] :sunxi-arisc driver v1.10 is starting
sunxi verify rootfs fail, reboot
[125]HELLO! SBOOT is starting!
[128]sboot commit : 9341f18 
NOTICE:  BL3-1: v1.0(debug):b108d89
NOTICE:  BL3-1: Built : 14:13:35, 2020-04-08
NOTICE:  BL3-1 commit: 8
NOTICE:  secure os exist
MESSAGE: [0x0] TEE-CORE: OP-TEE version: 5f533bf9-dirty #1 2020年 08月 08日 星期六 03:04:16 UTC arm
NOTICE:  BL3-1: Preparing for EL3 exit to normal world
NOTICE:  BL3-1: Next image address = 0x4a000000
NOTICE:  BL3-1: Next image spsr = 0x1d3
[00.985][NE]rawnand not support chip 1: 03 03 03 03 03 03 03 03
[00.990][NE]rawnand not support chip 2: 03 03 03 03 03 03 03 03
[00.996][NE]rawnand not support chip 3: 03 03 03 03 03 03 03 03
[01.007]Item0 (Map) magic is bad
[02.975]set disp.dev2_output_type fail. using defval=0
[03.019]secure storage read rpmb_key fail with:-1
[03.023]secure storage read dm_crypt_key fail with:-1
[03.030][ARISC ERROR] :get [allwinner,sunxi-hwspinlock] device node error
[SCP] :sunxi-arisc driver begin startup 2
[SCP] :0x1
[SCP] :arisc version: [ramsm-xt318rnit-1v-a0.0.ler-esaerid-]
[SCP] :arisc startup ready
[SCP] :arisc startup notify message feedback
[SCP] :send hard sync feedback message: 0x900200
[SCP] :sunxi-arisc driver v1.10 is starting
sunxi verify rootfs fail, reboot
[125]HELLO! SBOOT is starting!
[128]sboot commit : 9341f18 
NOTICE:  BL3-1: v1.0(debug):b108d89
NOTICE:  BL3-1: Built : 14:13:35, 2020-04-08
NOTICE:  BL3-1 commit: 8
NOTICE:  secure os exist
MESSAGE: [0x0] TEE-CORE: OP-TEE version: 5f533bf9-dirty #1 2020年 08月 08日 星期六 03:04:16 UTC arm
NOTICE:  BL3-1: Preparing for EL3 exit to normal world
NOTICE:  BL3-1: Next image address = 0x4a000000
NOTICE:  BL3-1: Next image spsr = 0x1d3
[00.987][NE]rawnand not support chip 1: 03 03 03 03 03 03 03 03
[00.992][NE]rawnand not support chip 2: 03 03 03 03 03 03 03 03
[00.998][NE]rawnand not support chip 3: 03 03 03 03 03 03 03 03
[01.009]Item0 (Map) magic is bad
[02.935]set disp.dev2_output_type fail. using defval=0
[02.979]secure storage read rpmb_key fail with:-1
[02.984]secure storage read dm_crypt_key fail with:-1
[02.990][ARISC ERROR] :get [allwinner,sunxi-hwspinlock] device node error
[SCP] :sunxi-arisc driver begin startup 2
[SCP] :0x1
[SCP] :arisc version: [ramsm-xt318rnit-1v-a0.0.ler-esaerid-]
[SCP] :arisc startup ready
[SCP] :arisc startup notify message feedback
[SCP] :send hard sync feedback message: 0x900200
[SCP] :sunxi-arisc driver v1.10 is starting
sunxi verify rootfs fail, reboot
[125]HELLO! SBOOT is starting!
[128]sboot commit : 9341f18 
NOTICE:  BL3-1: v1.0(debug):b108d89
NOTICE:  BL3-1: Built : 14:13:35, 2020-04-08
NOTICE:  BL3-1 commit: 8
NOTICE:  secure os exist
MESSAGE: [0x0] TEE-CORE: OP-TEE version: 5f533bf9-dirty #1 2020年 08月 08日 星期六 03:04:16 UTC arm
NOTICE:  BL3-1: Preparing for EL3 exit to normal world
NOTICE:  BL3-1: Next image address = 0x4a000000
NOTICE:  BL3-1: Next image spsr = 0x1d3
[00.991][NE]rawnand not support chip 1: 03 03 03 03 03 03 03 03
[00.997][NE]rawnand not support chip 2: 03 03 03 03 03 03 03 03
[01.002][NE]rawnand not support chip 3: 03 03 03 03 03 03 03 03
[01.013]Item0 (Map) magic is bad
[02.948]set disp.dev2_output_type fail. using defval=0
[02.992]secure storage read rpmb_key fail with:-1
[02.997]secure storage read dm_crypt_key fail with:-1
[03.003][ARISC ERROR] :get [allwinner,sunxi-hwspinlock] device node error
[SCP] :sunxi-arisc driver begin startup 2
[SCP] :0x1
[SCP] :arisc version: [ramsm-xt318rnit-1v-a0.0.ler-esaerid-]
[SCP] :arisc startup ready
[SCP] :arisc startup notify message feedback
[SCP] :send hard sync feedback message: 0x900200
[SCP] :sunxi-arisc driver v1.10 is starting
sunxi verify rootfs fail, reboot
[125]HELLO! SBOOT is starting!
[128]sboot commit : 9341f18 
NOTICE:  BL3-1: v1.0(debug):b108d89
NOTICE:  BL3-1: Built : 14:13:35, 2020-04-08
NOTICE:  BL3-1 commit: 8
NOTICE:  secure os exist
MESSAGE: [0x0] TEE-CORE: OP-TEE version: 5f533bf9-dirty #1 2020年 08月 08日 星期六 03:04:16 UTC arm
NOTICE:  BL3-1: Preparing for EL3 exit to normal world
NOTICE:  BL3-1: Next image address = 0x4a000000
NOTICE:  BL3-1: Next image spsr = 0x1d3
ˇ[00.991][NE]rawnand not support chip 1: 03 03 03 03 03 03 03 03
[00.996][NE]rawnand not support chip 2: 03 03 03 03 03 03 03 03
[01.002][NE]rawnand not support chip 3: 03 03 03 03 03 03 03 03
[01.013]Item0 (Map) magic is bad
[02.959]set disp.dev2_output_type fail. using defval=0
[03.003]secure storage read rpmb_key fail with:-1
[03.007]secure storage read dm_crypt_key fail with:-1
[03.014][ARISC ERROR] :get [allwinner,sunxi-hwspinlock] device node error
[SCP] :sunxi-arisc driver begin startup 2
[SCP] :0x1
[SCP] :arisc version: [ramsm-xt318rnit-1v-a0.0.ler-esaerid-]
[SCP] :arisc startup ready
[SCP] :arisc startup notify message feedback
[SCP] :send hard sync feedback message: 0x900200
[SCP] :sunxi-arisc driver v1.10 is starting
sunxi verify rootfs fail, reboot
[125]HELLO! SBOOT is starting!
[128]sboot commit : 9341f18 
NOTICE:  BL3-1: v1.0(debug):b108d89
NOTICE:  BL3-1: Built : 14:13:35, 2020-04-08
NOTICE:  BL3-1 commit: 8
NOTICE:  secure os exist
MESSAGE: [0x0] TEE-CORE: OP-TEE version: 5f533bf9-dirty #1 2020年 08月 08日 星期六 03:04:16 UTC arm
NOTICE:  BL3-1: Preparing for EL3 exit to normal world
NOTICE:  BL3-1: Next image address = 0x4a000000
NOTICE:  BL3-1: Next image spsr = 0x1d3
ˇ[00.986][NE]rawnand not support chip 1: 03 03 03 03 03 03 03 03
[00.992][NE]rawnand not support chip 2: 03 03 03 03 03 03 03 03
[00.997][NE]rawnand not support chip 3: 03 03 03 03 03 03 03 03
[01.008]Item0 (Map) magic is bad
[02.954]set disp.dev2_output_type fail. using defval=0
[02.999]secure storage read rpmb_key fail with:-1
[03.003]secure storage read dm_crypt_key fail with:-1
[03.010][ARISC ERROR] :get [allwinner,sunxi-hwspinlock] device node error
[SCP] :sunxi-arisc driver begin startup 2
[SCP] :0x1
[SCP] :arisc version: [ramsm-xt318rnit-1v-a0.0.ler-esaerid-]
[SCP] :arisc startup ready
[SCP] :arisc startup notify message feedback
[SCP] :send hard sync feedback message: 0x900200
[SCP] :sunxi-arisc driver v1.10 is starting
sunxi verify rootfs fail, reboot
[125]HELLO! SBOOT is starting!
[128]sboot commit : 9341f18 
NOTICE:  BL3-1: v1.0(debug):b108d89
NOTICE:  BL3-1: Built : 14:13:35, 2020-04-08
NOTICE:  BL3-1 commit: 8
NOTICE:  secure os exist
MESSAGE: [0x0] TEE-CORE: OP-TEE version: 5f533bf9-dirty #1 2020年 08月 08日 星期六 03:04:16 UTC arm
NOTICE:  BL3-1: Preparing for EL3 exit to normal world
NOTICE:  BL3-1: Next image address = 0x4a000000
NOTICE:  BL3-1: Next image spsr = 0x1d3
[00.987][NE]rawnand not support chip 1: 03 03 03 03 03 03 03 03
[00.992][NE]rawnand not support chip 2: 03 03 03 03 03 03 03 03
[00.998][NE]rawnand not support chip 3: 03 03 03 03 03 03 03 03
[01.009]Item0 (Map) magic is bad
[02.962]set disp.dev2_output_type fail. using defval=0
[03.006]secure storage read rpmb_key fail with:-1
[03.010]secure storage read dm_crypt_key fail with:-1
[03.017][ARISC ERROR] :get [allwinner,sunxi-hwspinlock] device node error
[SCP] :sunxi-arisc driver begin startup 2
[SCP] :0x1
[SCP] :arisc version: [ramsm-xt318rnit-1v-a0.0.ler-esaerid-]
[SCP] :arisc startup ready
[SCP] :arisc startup notify message feedback
[SCP] :send hard sync feedback message: 0x900200
[SCP] :sunxi-arisc driver v1.10 is starting
sunxi verify rootfs fail, reboot
[125]HELLO! SBOOT is starting!
[128]sboot commit : 9341f18 
NOTICE:  BL3-1: v1.0(debug):b108d89
NOTICE:  BL3-1: Built : 14:13:35, 2020-04-08
NOTICE:  BL3-1 commit: 8
NOTICE:  secure os exist
MESSAGE: [0x0] TEE-CORE: OP-TEE version: 5f533bf9-dirty #1 2020年 08月 08日 星期六 03:04:16 UTC arm
NOTICE:  BL3-1: Preparing for EL3 exit to normal world
NOTICE:  BL3-1: Next image address = 0x4a000000
NOTICE:  BL3-1: Next image spsr = 0x1d3
[00.985][NE]rawnand not support chip 1: 03 03 03 03 03 03 03 03
[00.991][NE]rawnand not support chip 2: 03 03 03 03 03 03 03 03
[00.996][NE]rawnand not support chip 3: 03 03 03 03 03 03 03 03
[01.007]Item0 (Map) magic is bad
[02.968]set disp.dev2_output_type fail. using defval=0
[03.012]secure storage read rpmb_key fail with:-1
[03.017]secure storage read dm_crypt_key fail with:-1
[03.023][ARISC ERROR] :get [allwinner,sunxi-hwspinlock] device node error
[SCP] :sunxi-arisc driver begin startup 2
[SCP] :0x1
[SCP] :arisc version: [ramsm-xt318rnit-1v-a0.0.ler-esaerid-]
[SCP] :arisc startup ready
[SCP] :arisc startup notify message feedback
[SCP] :send hard sync feedback message: 0x900200
[SCP] :sunxi-arisc driver v1.10 is starting
sunxi verify rootfs fail, reboot
[125]HELLO! SBOOT is starting!
[128]sboot commit : 9341f18 
NOTICE:  BL3-1: v1.0(debug):b108d89
NOTICE:  BL3-1: Built : 14:13:35, 2020-04-08
NOTICE:  BL3-1 commit: 8
NOTICE:  secure os exist
MESSAGE: [0x0] TEE-CORE: OP-TEE version: 5f533bf9-dirty #1 2020年 08月 08日 星期六 03:04:16 UTC arm
NOTICE:  BL3-1: Preparing for EL3 exit to normal world
NOTICE:  BL3-1: Next image address = 0x4a000000
NOTICE:  BL3-1: Next image spsr = 0x1d3
[00.989][NE]rawnand not support chip 1: 03 03 03 03 03 03 03 03
[00.995][NE]rawnand not support chip 2: 03 03 03 03 03 03 03 03
[01.000][NE]rawnand not support chip 3: 03 03 03 03 03 03 03 03
[01.011]Item0 (Map) magic is bad
[02.982]set disp.dev2_output_type fail. using defval=0
[03.026]secure storage read rpmb_key fail with:-1
[03.030]secure storage read dm_crypt_key fail with:-1
[03.037][ARISC ERROR] :get [allwinner,sunxi-hwspinlock] device node error
[SCP] :sunxi-arisc driver begin startup 2
[SCP] :0x1
[SCP] :arisc version: [ramsm-xt318rnit-1v-a0.0.ler-esaerid-]
[SCP] :arisc startup ready
[SCP] :arisc startup notify message feedback
[SCP] :send hard sync feedback message: 0x900200
[SCP] :sunxi-arisc driver v1.10 is starting
sunxi verify rootfs fail, reboot
[125]HELLO! SBOOT is starting!
[128]sboot commit : 9341f18 
NOTICE:  BL3-1: v1.0(debug):b108d89
NOTICE:  BL3-1: Built : 14:13:35, 2020-04-08
NOTICE:  BL3-1 commit: 8
NOTICE:  secure os exist
MESSAGE: [0x0] TEE-CORE: OP-TEE version: 5f533bf9-dirty #1 2020年 08月 08日 星期六 03:04:16 UTC arm
NOTICE:  BL3-1: Preparing for EL3 exit to normal world
NOTICE:  BL3-1: Next image address = 0x4a000000
NOTICE:  BL3-1: Next image spsr = 0x1d3
[00.987][NE]rawnand not support chip 1: 03 03 03 03 03 03 03 03
[00.992][NE]rawnand not support chip 2: 03 03 03 03 03 03 03 03
[00.998][NE]rawnand not support chip 3: 03 03 03 03 03 03 03 03
[01.008]Item0 (Map) magic is bad
[02.934]set disp.dev2_output_type fail. using defval=0
[02.978]secure storage read rpmb_key fail with:-1
[02.982]secure storage read dm_crypt_key fail with:-1
[02.989][ARISC ERROR] :get [allwinner,sunxi-hwspinlock] device node error
[SCP] :sunxi-arisc driver begin startup 2
[SCP] :0x1
[SCP] :arisc version: [ramsm-xt318rnit-1v-a0.0.ler-esaerid-]
[SCP] :arisc startup ready
[SCP] :arisc startup notify message feedback
[SCP] :send hard sync feedback message: 0x900200
[SCP] :sunxi-arisc driver v1.10 is starting
[03.706]Starting kernel ...

numid=13,iface=MIXER,name='Headphone Switch'
  ; type=BOOLEAN,access=rw------,values=1
  : values=on
numid=9,iface=MIXER,name='Headphone Volume'
  ; type=INTEGER,access=rw---R--,values=1,min=0,max=7,step=0
  : values=3
  | dBscale-min=-42.00dB,step=6.00dB,mute=0
numid=10,iface=MIXER,name='LINEOUT Output Select'
  ; type=ENUMERATED,access=rw------,values=1,items=2
  ; Item #0 'DAC_SINGLE'
  ; Item #1 'DAC_DIFFER'
  : values=1
numid=15,iface=MIXER,name='LINEOUT Switch'
  ; type=BOOLEAN,access=rw------,values=1
  : values=on
numid=6,iface=MIXER,name='LINEOUT volume'
  ; type=INTEGER,access=rw---R--,values=1,min=0,max=31,step=0
  : values=31
  | dBrange-
    rangemin=0,,rangemax=1
      | dBscale-min=0.00dB,step=0.00dB,mute=1
    rangemin=2,,rangemax=31
      | dBscale-min=-43.50dB,step=1.50dB,mute=1

numid=11,iface=MIXER,name='ADCL Input MIC1 Boost Switch'
  ; type=BOOLEAN,access=rw------,values=1
  : values=off
numid=4,iface=MIXER,name='MIC1 gain volume'
  ; type=INTEGER,access=rw---R--,values=1,min=0,max=31,step=0
  : values=0
  | dBscale-min=0.00dB,step=1.00dB,mute=0
numid=12,iface=MIXER,name='ADCR Input MIC2 Boost Switch'
  ; type=BOOLEAN,access=rw------,values=1
  : values=off
numid=5,iface=MIXER,name='MIC2 gain volume'
  ; type=INTEGER,access=rw---R--,values=1,min=0,max=31,step=0
  : values=0
  | dBscale-min=0.00dB,step=1.00dB,mute=0
e2fsck 1.43.9 (8-Feb-2018)
ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /dev/by-name/misc is mounted.
/dev/by-name/misc: recovering journal
/dev/by-name/misc: clean, 21/256 files, 1123/2048 blocks
killall: rsyslogd: no process killed
Failed to connect to ubus
crond[1182]: crond (busybox 1.31.0) started, log level 8


cp: can't stat '/data/config/ava/ota_mark': No such file or directory
chpasswd: password for 'root' changed

login[1299]: root login on 'ttyS0'

--------------------------------------------------------------
    _   _   _                        _     _                  
   / \ | |_| |__   ___ _ __   __ _  | |   (_)_ __  _   ___  __
  / _ \| __| '_ \ / _ \ '_ \ / _` | | |   | | '_ \| | | \ \/ /
 / ___ \ |_| | | |  __/ | | | (_| | | |___| | | | | |_| |>  < 
/_/   \_\__|_| |_|\___|_| |_|\__,_| |_____|_|_| |_|\__,_/_/\_\
                                                              
--------------------------------------------------------------
 Athena Linux (p2029_release)
--------------------------------------------------------------

built with dustbuilder (https://builder.dontvacuum.me)
2025-07-18T11:08:05Z
1138
[root@p2029_release:~]# 

The regular shutdown/power up sequence seemed a bit different however:

[340]HELLO! SBOOT is starting!
[343]sboot commit : 9341f18 
NOTICE:  BL3-1: v1.0(debug):b108d89
NOTICE:  BL3-1: Built : 14:13:35, 2020-04-08
NOTICE:  BL3-1 commit: 8
NOTICE:  secure os exist
MESSAGE: [0x0] TEE-CORE: OP-TEE version: 5f533bf9-dirty #1 2020年 08月 08日 星期六 03:04:16 UTC arm
NOTICE:  BL3-1: Preparing for EL3 exit to normal world
NOTICE:  BL3-1: Next image address = 0x4a000000
NOTICE:  BL3-1: Next image spsr = 0x1d3
[01.201][NE]rawnand not support chip 1: 03 03 03 03 03 03 03 03
[01.206][NE]rawnand not support chip 2: 03 03 03 03 03 03 03 03
[01.212][NE]rawnand not support chip 3: 03 03 03 03 03 03 03 03
[01.223]Item0 (Map) magic is bad
[03.191]set disp.dev2_output_type fail. using defval=0
[03.235]secure storage read rpmb_key fail with:-1
[03.239]secure storage read dm_crypt_key fail with:-1
[03.246][ARISC ERROR] :get [allwinner,sunxi-hwspinlock] device node error
[SCP] :sunxi-arisc driver begin startup 2
[SCP] :0x1
[SCP] :arisc version: [ramsm-xt318rnit-1v-a0.0.ler-esaerid-]
[SCP] :arisc startup ready
[SCP] :arisc startup notify message feedback
[SCP] :send hard sync feedback message: 0x900200
[SCP] :sunxi-arisc driver v1.10 is starting
[03.964]Starting kernel ...

numid=13,iface=MIXER,name='Headphone Switch'
  ; type=BOOLEAN,access=rw------,values=1
  : values=on
numid=9,iface=MIXER,name='Headphone Volume'
  ; type=INTEGER,access=rw---R--,values=1,min=0,max=7,step=0
  : values=3
  | dBscale-min=-42.00dB,step=6.00dB,mute=0
numid=10,iface=MIXER,name='LINEOUT Output Select'
  ; type=ENUMERATED,access=rw------,values=1,items=2
  ; Item #0 'DAC_SINGLE'
  ; Item #1 'DAC_DIFFER'
  : values=1
numid=15,iface=MIXER,name='LINEOUT Switch'
  ; type=BOOLEAN,access=rw------,values=1
  : values=on
numid=6,iface=MIXER,name='LINEOUT volume'
  ; type=INTEGER,access=rw---R--,values=1,min=0,max=31,step=0
  : values=31
  | dBrange-
    rangemin=0,,rangemax=1
      | dBscale-min=0.00dB,step=0.00dB,mute=1
    rangemin=2,,rangemax=31
      | dBscale-min=-43.50dB,step=1.50dB,mute=1

numid=11,iface=MIXER,name='ADCL Input MIC1 Boost Switch'
  ; type=BOOLEAN,access=rw------,values=1
  : values=off
numid=4,iface=MIXER,name='MIC1 gain volume'
  ; type=INTEGER,access=rw---R--,values=1,min=0,max=31,step=0
  : values=0
  | dBscale-min=0.00dB,step=1.00dB,mute=0
numid=12,iface=MIXER,name='ADCR Input MIC2 Boost Switch'
  ; type=BOOLEAN,access=rw------,values=1
  : values=off
numid=5,iface=MIXER,name='MIC2 gain volume'
  ; type=INTEGER,access=rw---R--,values=1,min=0,max=31,step=0
  : values=0
  | dBscale-min=0.00dB,step=1.00dB,mute=0
e2fsck 1.43.9 (8-Feb-2018)
ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /dev/by-name/misc is mounted.
/dev/by-name/misc: clean, 21/256 files, 1123/2048 blocks
killall: rsyslogd: no process killed
Failed to connect to ubus
oggdec from vorbis-tools 1.4.0
Decoding "/data/personalized_voice/GLADOS/0.ogg" to "/tmp/0.wav"

	[  0.0%]
	[  1.0%]
	[  1.5%]
	[  2.0%]
	[  2.5%]
	[  2.5%]
	[  3.0%]
	[  3.5%]
	[  3.5%]
	[  4.0%]
	[  4.5%]
	[  4.5%]
	[  5.0%]
	[  5.5%]
	[  5.5%]
	[  6.0%]
	[  6.5%]
	[  7.0%]
	[  7.5%]
	[  8.0%]
	[  8.5%]
	[  9.5%]
	[ 10.0%]
	[ 10.5%]
	[ 11.5%]
	[ 12.0%]
	[ 12.5%]
	[ 13.5%]
	[ 14.0%]
	[ 14.5%]
	[ 15.5%]
	[ 16.0%]
	[ 16.5%]
	[ 17.0%]
	[ 18.0%]
	[ 18.5%]
	[ 19.0%]
	[ 20.0%]
	[ 20.5%]
	[ 21.0%]
	[ 22.0%]
	[ 22.5%]
	[ 23.0%]
	[ 24.0%]
	[ 24.5%]
	[ 25.0%]
	[ 25.5%]
	[ 26.5%]
	[ 27.0%]
	[ 27.5%]
	[ 28.5%]
	[ 29.0%]
	[ 29.5%]
	[ 30.5%]
	[ 31.0%]
	[ 31.5%]
	[ 32.5%]
	[ 33.0%]
	[ 33.5%]
	[ 34.0%]
	[ 35.0%]
	[ 35.5%]
	[ 36.0%]
	[ 37.0%]
	[ 37.5%]
	[ 38.0%]
	[ 39.0%]
	[ 39.5%]
	[ 40.0%]
	[ 41.0%]
	[ 41.5%]
	[ 42.0%]
	[ 42.5%]
	[ 43.5%]
	[ 44.0%]
	[ 44.5%]
	[ 45.5%]
	[ 46.0%]
	[ 46.5%]
	[ 47.5%]
	[ 48.0%]
	[ 48.5%]
	[ 49.5%]
	[ 50.0%]
	[ 50.5%]
	[ 51.0%]
	[ 52.0%]
	[ 52.5%]
	[ 53.0%]
	[ 54.0%]
	[ 54.5%]
	[ 55.0%]
	[ 56.0%]
	[ 56.5%]
	[ 57.0%]
	[ 58.0%]
	[ 58.5%]
	[ 59.0%]
	[ 59.5%]
	[ 60.5%]
	[ 61.0%]
	[ 61.5%]
	[ 62.5%]
	[ 63.0%]
	[ 63.5%]
	[ 64.5%]
	[ 65.0%]
	[ 65.5%]
	[ 66.5%]
	[ 67.0%]
	[ 67.0%]
	[ 67.5%]
	[ 68.0%]
	[ 69.0%]
	[ 69.5%]
	[ 70.0%]
	[ 71.0%]
	[ 71.5%]
	[ 72.0%]
	[ 73.0%]
	[ 73.5%]
	[ 74.0%]
	[ 74.5%]
	[ 75.0%]
	[ 75.5%]
	[ 76.0%]
	[ 77.0%]
	[ 77.5%]
	[ 78.0%]
	[ 78.5%]
	[ 79.5%]
	[ 80.0%]
	[ 80.5%]
	[ 81.5%]
	[ 82.0%]
	[ 82.5%]
	[ 83.0%]
	[ 83.5%]
	[ 84.0%]
	[ 84.5%]
	[ 85.0%]
	[ 85.5%]
	[ 85.5%]
	[ 86.0%]
	[ 86.5%]
	[ 87.0%]
	[ 88.0%]
	[ 88.5%]
	[ 89.0%]
	[ 90.0%]
	[ 90.5%]
	[ 91.0%]
	[ 92.0%]
	[ 92.5%]
	[ 93.0%]
	[ 94.0%]
	[ 94.5%]
	[ 95.0%]
	[ 95.5%]
	[ 96.5%]
	[ 97.0%]
	[ 97.5%]
	[ 98.5%]
	[ 99.0%]
	[ 99.0%]
	[ 99.5%]
	[100.0%]
Playing WAVE '/tmp/0.wav' : Signed 16 bit Little Endian, Rate 16000 Hz, Stereo
crond[1186]: crond (busybox 1.31.0) started, log level 8


cp: can't stat '/data/config/ava/ota_mark': No such file or directory

login[1295]: root login on 'ttyS0'

--------------------------------------------------------------
    _   _   _                        _     _                  
   / \ | |_| |__   ___ _ __   __ _  | |   (_)_ __  _   ___  __
  / _ \| __| '_ \ / _ \ '_ \ / _` | | |   | | '_ \| | | \ \/ /
 / ___ \ |_| | | |  __/ | | | (_| | | |___| | | | | |_| |>  < 
/_/   \_\__|_| |_|\___|_| |_|\__,_| |_____|_|_| |_|\__,_/_/\_\
                                                              
--------------------------------------------------------------
 Athena Linux (p2029_release)
--------------------------------------------------------------

built with dustbuilder (https://builder.dontvacuum.me)
2025-07-18T11:08:05Z
1138
chpasswd: password for 'root' changed
[root@p2029_release:~]# 

[Hypfer]

Any suggestions to what I can try next, or something that I might have missed?

Not really.
Very likely it's some kind of hardware issue.

Best case, it's just the battery dying of old age, but even then, I'm not sure if I would recommend investing into a new battery for this old machine that is also known to die from other hardware faults.

[bort9]

That's fair enough, bit of a bummer to junk this as it's been a perfectly serviceable unit otherwise. Thanks for having a look otherwise. :)