After upgrade from OpenTX to EdgeTX the error "No SDcard" aktiv

[Willi-Billi]

Is there an existing issue for this problem?

• I have searched the existing issues

What part of EdgeTX is the focus of this bug?

Transmitter firmware

Current Behavior

I have a FrSky QX7 transmitter with OpenTX.
I have made the update to the latest EdgeTX with the Buddy function.
After this, the transmitter start, but have the error "No SDcard" on the display.
The SDcard, a 32Gbyte card is correct on the PC adapter.

Expected Behavior

I think, when a SDcard works with OpenTX, it will / must also works with EdgeTX.

I was then look for a other, smaler SDCard and this 16GByte it works. But it is not so easy to bay smale SDCard.
Please look, that bigger size will also works.

Steps To Reproduce

use a 32 GByte SDCard

Version

2.10.5

Transmitter

FrSky Q X7 / Q X7S (ACCST)

Operating System (OS)

Windows

OS Version

Win10

Anything else?

No response

[Willi-Billi]

Dear all,
I have bay a 8 GByte SD card and with this card it works.
Now, I think, is a SW bucg by EdgeTX, that only small card work.
But 32 Gbyte is a small one, there are also 1TB and more in the shop's.
Kind regards
Willi

[pfeerick]

Some SD cards which do not init properly within the required timeframe are no longer compatible with EdgeTX as of 2.10. This usually only applies to generic / clone SD cards, not "name brand" SD cards, and is not related to size. Larger SD cards will work, as long as you format them correctly as FAT32 (*not *exFAT). They may also perform better if you create a smaller (8GB/16GB) partition rather than use the entire SD card.

…

On Sat, Dec 28, 2024 at 6:25 AM Willi-Billi ***@***.***> wrote: Dear all, I have bay a 8 GByte SD card and with this card it works. Now, I think, is a SW bucg by EdgeTX, that only small card work. But 32 Gbyte is a small one, there are also 1TB and more in the shop's. Kind regards Willi — Reply to this email directly, view it on GitHub <#5741 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABJ66KPCGQ6AUL72IEDSE5T2HWZVHAVCNFSM6AAAAABUHVWM22VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDKNRUGAYDSNRXGM> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>