SUPPORTED_DEVICES.md

Supported Devices

Currently Supported Platforms

Platform	Description
Switch	On/off switches, smart plugs, power strips
Light	RGB, RGBW, colour temperature, dimmable bulbs
Cover	Curtains, blinds, garage doors
Fan	Ceiling fans, standing fans with speed/direction
Climate	Thermostats, heaters, air conditioners
Vacuum	Robot vacuums
Sensor	Temperature, humidity, energy monitoring, etc.
Binary Sensor	Contact, motion, fault detection
Number	Countdown timers, thresholds, numeric controls
Select	Mode selectors, power-on behaviour

Energy monitoring (voltage, current, watts, kWh) is supported for compatible switch devices.

Climate DP Mappings

Tuya climate devices vary significantly. Below are known working mappings:

DP	Moes BHT 002	Qlima WMS S + SC52	Avatto
1	On/Off {true, false}	On/Off {true, false}	On/Off {true, false}
2	Target temp (scale: 0.5)	Target temp (scale: 1)	Target temp (scale: 1)
3	Current temp (scale: 0.5)	Current temp (scale: 1)	Current temp (scale: 1)
4	Mode {0, 1}	Mode {hot, wind, wet, cold, auto}	?
5	Eco mode	Fan {strong, high, middle, low, auto}	?
19	--	Temp unit {c, f}	?
101	--	Outdoor temp (scale: 1)	?
102	External sensor (scale: 0.5)	Unknown integer	?

Reference: Moes BHT 002

Energy Monitoring

Energy values can be configured as individual sensor entities or accessed via switch attributes with template sensors:

sensor:
  - platform: template
    sensors:
      tuya_voltage:
        value_template: "{{ states.switch.my_plug.attributes.voltage }}"
        unit_of_measurement: 'V'
      tuya_current:
        value_template: "{{ states.switch.my_plug.attributes.current }}"
        unit_of_measurement: 'mA'
      tuya_power:
        value_template: "{{ states.switch.my_plug.attributes.current_consumption }}"
        unit_of_measurement: 'W'

Note: Voltage and consumption values usually need scaling by 0.1. If energy values don't update frequently enough, set the scan interval (30 seconds recommended, minimum 10).

Smart Kettle DP Mappings

Tuya WiFi smart kettles with temperature control and keep-warm functionality.

DP	Value (example)	Description	Entity Type
1	False	Power on/off	Switch
2	36	Current temperature (°C)	Sensor
3	97	Target temperature (°C)	Number
8	100	Target temperature (°F scale)	Number
9	212	Current temperature (°F scale)	Sensor
12	c	Temperature unit (c / f)	Select
13	False	Keep warm toggle	Switch
14	60	Keep warm duration (minutes)	Number
15	standby	Status (standby, heating, keep_warm)	Sensor
16	temp_setting	Work mode (temp_setting, boil)	Select
18	0	Fault code	Sensor
19	0	Reserved / unknown	--

Recommended entity setup:

• Switch on DP 1 for power control
• Sensor on DP 2 for current temperature (unit: °C, scaling if needed)
• Number on DP 3 for target temperature
• Select on DP 12 for temperature unit with options c;f
• Switch on DP 13 for keep warm
• Number on DP 14 for keep warm duration (minutes)
• Sensor on DP 15 for device status

---

Ceiling Fan + Light DP Mappings

Tuya-based ceiling fan controllers with integrated light (e.g. Grid Connect, Deta, Arlec). Protocol 3.3.

DP	Value (example)	Description	Entity Type
1	True	Fan on/off	Switch
9	True	Light on/off	Light

Auto-profile: When DPs 1 and 9 are detected, the "Ceiling Fan with Light" profile is offered for one-click setup.

Entity setup:

• Switch on DP 1 for fan on/off
• Light on DP 9 for light on/off

Fan speed control DPs vary by model. After applying the profile, edit the device to add a fan entity with speed control if your device supports it.

---

Roller Blind / Curtain Motor DP Mappings

Tuya WiFi roller blind and curtain motors (e.g. Zemismart ZM25, generic Tuya tubular motors). Protocol 3.3.

DP	Value (example)	Description	Entity Type
1	"open"	Control command (open, close, stop)	Cover
2	50	Set position (0-100)	Cover
3	50	Current position (0-100, read-only)	Cover
5	"forward"	Motor direction (forward, back)	--
7	"opening"	Work state (opening, closing)	--

Auto-profile: When DPs 1, 2, 3, and 7 are detected, the "Roller Blind / Curtain Motor" profile is offered for one-click setup.

Entity setup:

• Cover on DP 1 with open_close_stop commands, position mode using DP 2 (set) and DP 3 (current)

---

Additional Device Support (Planned / In Progress)

Water Quality Monitors (8-in-1 Testers)

WiFi smart online water quality testers (e.g. PH-W218, Yieryi 8-in-1). Protocol 3.4.

Sensors:

DP	Code	Description	Scale	Unit
8	temp_current	Water Temperature	0.1	C
106	ph_current	pH Level	0.01	pH
111	tds_current	Total Dissolved Solids	1	ppm
116	ec_current	Electrical Conductivity	0.001	mS/cm
121	salinity_current	Salinity	1	ppm
126	pro_current	Specific Gravity	-	S.G
131	orp_current	Oxidation-Reduction Potential	1	mV
136	cf_current	Conductivity Factor	0.01	CF
141	rh_current	Relative Humidity	1	%

Warning Thresholds (configurable via Number entities):

DP Range	Parameter
102-103	Temperature high/low
107-108	pH high/low
112-113	TDS high/low
117-118	EC high/low
122-123	Salinity high/low
127-128	Specific Gravity high/low
132-133	ORP high/low
137-138	CF high/low
142-143	Humidity high/low

DP 101 (sensor_list) contains a Base64-encoded sensor configuration value.

Mini Hydroponics / Smart Garden Controllers

Smart growing systems with pump, light, and timer control. Protocol 3.3.

DP	Code	Description	Entity Type
101	switch	Main Power	Switch
102	pump	Water Pump	Switch
103	pump_timer	Pump Schedule (Base64 encoded)	Raw
104	led	Grow Light	Switch
105	led_model	Light Mode (GROW, etc.)	Select
106	Countdown_set	Timer Setting	Number
107	Countdown_countdown	Timer Remaining	Sensor

Unsupported Sensor Types

Sensors not covered by the official Tuya integration (reference: tuya_unsupported_sensors):

Sensor Type	DP Codes
Temperature	temp, temperature, va_temperature, temp_current
Humidity	humidity, va_humidity, humidity_value
Battery	battery, battery_percentage, battery_state, battery_value
Door/Contact	contact, doorcontact_state, door_sensor_state
PIR Motion	motion, pir, pir_state
Connectivity	online

Other Device Categories Under Investigation

Category	Key Features	Status
Pet Feeders	Meal scheduling (Raw DP), portion control, feeding history	Investigating
Robot Mowers	HA lawn_mower entity, zone control, rain sensing	Investigating
Irrigation Controllers	Multi-zone scheduling, weather delay, per-zone timing	Investigating
Air Quality Monitors	PM2.5, PM10, CO2, VOC, formaldehyde	Investigating
Smart Locks	Lock/unlock, multiple unlock methods, door state, auto-lock	Investigating
Energy Monitors / Circuit Breakers	Raw Base64 DP decoding for voltage/current/power	Investigating
Pool/Spa Heat Pump Controllers	Temperature control, fault monitoring, multi-zone	Investigating